This is the latest recevied telemetry packets stored in our database for station/object DG3NAD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745051061 | 14.2 deg C | 67.8 % | 1010.3 hPa | 0 | 0 |
| 1745050161 | 13.4 deg C | 68.5 % | 1010.5 hPa | 0 | 0 |
| 1745049261 | 12.3 deg C | 69.6 % | 1011.5 hPa | 0 | 0 |
| 1745048361 | 11.2 deg C | 71 % | 1011.1 hPa | 0 | 0 |
| 1745047461 | 10.1 deg C | 72.4 % | 1011.3 hPa | 0 | 0 |
| 1745046561 | 9.5 deg C | 73.2 % | 1012.3 hPa | 0 | 0 |
| 1745045661 | 9.1 deg C | 73.6 % | 1011.5 hPa | 0 | 0 |
| 1745044761 | 8.7 deg C | 74.3 % | 1011.1 hPa | 0 | 0 |
| 1745044454 | 8.6 deg C | 74.4 % | 1011.9 hPa | 0 | 0 |
| 1745043554 | 8.4 deg C | 74.7 % | 1013.7 hPa | 0 | 0 |
| 1745042654 | 8.2 deg C | 74.9 % | 1010.6 hPa | 0 | 0 |
| 1745041754 | 8 deg C | 75.1 % | 1011.6 hPa | 0 | 0 |
| 1745040853 | 7.9 deg C | 75.4 % | 1010 hPa | 0 | 0 |
| 1745039956 | 7.8 deg C | 75.6 % | 1011.3 hPa | 0 | 0 |
| 1745039053 | 7.6 deg C | 75.8 % | 1011.2 hPa | 0 | 0 |
| 1745038153 | 7.6 deg C | 75.9 % | 1011 hPa | 0 | 0 |
| 1745037253 | 7.6 deg C | 76 % | 1011 hPa | 0 | 0 |
| 1745036353 | 7.6 deg C | 75.9 % | 1013 hPa | 0 | 0 |
| 1745035453 | 7.6 deg C | 75.9 % | 1011.8 hPa | 0 | 0 |
| 1745034553 | 7.7 deg C | 75.8 % | 1013.7 hPa | 0 | 0 |
| 1745033653 | 7.7 deg C | 75.8 % | 1012.5 hPa | 0 | 0 |
| 1745032752 | 7.7 deg C | 75.9 % | 1012.2 hPa | 0 | 0 |
| 1745031852 | 7.7 deg C | 75.9 % | 1012.2 hPa | 0 | 0 |
| 1745030952 | 7.7 deg C | 76 % | 1012 hPa | 0 | 0 |
| 1745030053 | 7.7 deg C | 76 % | 1011.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)