This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791764194 | 87 Count | 959 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791763593 | 86 Count | 950 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791762992 | 85 Count | 939 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791762392 | 84 Count | 928 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791761791 | 83 Count | 918 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791761190 | 82 Count | 906 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791760590 | 81 Count | 898 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791759989 | 80 Count | 889 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791759388 | 79 Count | 878 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791758788 | 78 Count | 865 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791758187 | 77 Count | 857 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791757586 | 76 Count | 838 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1791756986 | 75 Count | 824 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1791756385 | 74 Count | 813 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791755784 | 73 Count | 802 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791755184 | 72 Count | 788 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791754583 | 71 Count | 783 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791753982 | 70 Count | 771 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1791753382 | 69 Count | 757 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1791752781 | 68 Count | 746 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791752180 | 67 Count | 734 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791751580 | 66 Count | 723 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791750979 | 65 Count | 716 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1791750378 | 64 Count | 698 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791749778 | 63 Count | 672 Count | 0 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)