This is the latest recevied telemetry packets stored in our database for station/object EA1PVC-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790643321 | 5.92 | 0 | 0 | 0 | 0 |
| 1790641515 | 6.01 | 0 | 0 | 0 | 0 |
| 1790640612 | 5.88 | 0 | 0 | 0 | 0 |
| 1790639708 | 5.98 | 0 | 0 | 0 | 0 |
| 1790638806 | 6.04 | 0 | 0 | 0 | 0 |
| 1790637903 | 5.88 | 0 | 0 | 0 | 0 |
| 1790637000 | 5.97 | 0 | 0 | 0 | 0 |
| 1790636096 | 6.01 | 0 | 0 | 0 | 0 |
| 1790635194 | 6 | 0 | 0 | 0 | 0 |
| 1790633388 | 5.96 | 0 | 0 | 0 | 0 |
| 1790632485 | 6 | 0 | 0 | 0 | 0 |
| 1790631582 | 5.96 | 0 | 0 | 0 | 0 |
| 1790630678 | 5.94 | 0 | 0 | 0 | 0 |
| 1790629776 | 6.01 | 0 | 0 | 0 | 0 |
| 1790627067 | 6.01 | 0 | 0 | 0 | 0 |
| 1790626164 | 5.9 | 0 | 0 | 0 | 0 |
| 1790625263 | 5.89 | 0 | 0 | 0 | 0 |
| 1790624358 | 5.98 | 0 | 0 | 0 | 0 |
| 1790623457 | 5.93 | 0 | 0 | 0 | 0 |
| 1790622554 | 6 | 0 | 0 | 0 | 0 |
| 1790620748 | 5.97 | 0 | 0 | 0 | 0 |
| 1790619845 | 5.97 | 0 | 0 | 0 | 0 |
| 1790618942 | 5.87 | 0 | 0 | 0 | 0 |
| 1790618037 | 5.88 | 0 | 0 | 0 | 0 |
| 1790617134 | 6.01 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)