APRS Track Direct

My position About ☰

reset

SIMLA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SIMLA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274540	13.8 Volt	880 Pkt	180 Pkt	78 Pcnt
1836274388	13.8 Volt	900 Pkt	180 Pkt	79 Pcnt
1836273938	13.88 Volt	870 Pkt	180 Pkt	78 Pcnt
1762302050	13.88 Volt	900 Pkt	170 Pkt	76 Pcnt
1762301446	13.88 Volt	920 Pkt	170 Pkt	76 Pcnt
1762300849	13.88 Volt	920 Pkt	170 Pkt	76 Pcnt
1762300251	13.88 Volt	890 Pkt	160 Pkt	76 Pcnt
1762299646	13.88 Volt	930 Pkt	180 Pkt	77 Pcnt
1762299046	13.88 Volt	890 Pkt	170 Pkt	77 Pcnt
1762298455	13.88 Volt	830 Pkt	150 Pkt	74 Pcnt
1762297847	13.88 Volt	790 Pkt	150 Pkt	73 Pcnt
1762297249	13.73 Volt	770 Pkt	140 Pkt	73 Pcnt
1762296650	13.88 Volt	710 Pkt	140 Pkt	71 Pcnt
1762296050	13.88 Volt	670 Pkt	120 Pkt	69 Pcnt
1762295447	13.88 Volt	690 Pkt	120 Pkt	69 Pcnt
1762294847	13.88 Volt	680 Pkt	120 Pkt	70 Pcnt
1762293647	13.88 Volt	780 Pkt	140 Pkt	70 Pcnt
1762293054	13.35 Volt	820 Pkt	150 Pkt	71 Pcnt
1762292447	13.58 Volt	860 Pkt	160 Pkt	74 Pcnt
1762291847	13.88 Volt	900 Pkt	170 Pkt	73 Pcnt
1762291247	13.88 Volt	920 Pkt	180 Pkt	72 Pcnt
1762290647	13.88 Volt	960 Pkt	180 Pkt	74 Pcnt
1762290052	13.58 Volt	960 Pkt	190 Pkt	74 Pcnt
1762289455	13.88 Volt	960 Pkt	190 Pkt	74 Pcnt
1762288847	13.88 Volt	970 Pkt	190 Pkt	73 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)