This is the latest recevied telemetry packets stored in our database for station/object DF2TH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | UBat* | IBat* | Sat* | -* | -* |
---|---|---|---|---|---|
1718710990 | 4.79 V | 0 mA | 4 - | 0 - | 0 - |
1718710564 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718710062 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718709767 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718708604 | 4.81 V | 0 mA | 4 - | 0 - | 0 - |
1718708434 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718708151 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718707939 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718707131 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718707011 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718706861 | 4.81 V | 0 mA | 5 - | 0 - | 0 - |
1718706741 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718706621 | 4.79 V | 0 mA | 4 - | 0 - | 0 - |
1718706501 | 4.81 V | 0 mA | 5 - | 0 - | 0 - |
1718706381 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718706261 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718706141 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718706021 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718705646 | 4.8 V | 0 mA | 4 - | 0 - | 0 - |
1718705366 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718705138 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718705018 | 4.8 V | 0 mA | 5 - | 0 - | 0 - |
1718704849 | 4.79 V | 0 mA | 5 - | 0 - | 0 - |
1718704278 | 4.81 V | 0 mA | 5 - | 0 - | 0 - |
1718704158 | 4.81 V | 0 mA | 5 - | 0 - | 0 - |
*Used Equation Coefficients:
UBat: 0, 0.005, 0
IBat: 0, 1, 0
Sat: 0, 1, 0
-: 0, 1, 0
-: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)