This is the latest recevied telemetry packets stored in our database for station/object OE5HWN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1732288382 | 975.3 hPa | 3.6 C deg | 48.4 % | 1008.4 hPa | 0 C deg |
| 1732286581 | 975.2 hPa | 3.6 C deg | 48.5 % | 1008.2 hPa | 0 C deg |
| 1732284781 | 974.7 hPa | 4.3 C deg | 46.9 % | 1007.6 hPa | 0 C deg |
| 1732282981 | 974 hPa | 4.6 C deg | 47.2 % | 1006.8 hPa | 0 C deg |
| 1732281181 | 973.5 hPa | 5 C deg | 48 % | 1006.2 hPa | 0 C deg |
| 1732279381 | 973.1 hPa | 4.4 C deg | 53.5 % | 1006 hPa | 0 C deg |
| 1732277581 | 972.9 hPa | 3.5 C deg | 60.2 % | 1005.9 hPa | 0 C deg |
| 1732275781 | 973.2 hPa | 4 C deg | 63.4 % | 1006.1 hPa | 0 C deg |
| 1732273981 | 973.1 hPa | 3.1 C deg | 66.4 % | 1006.1 hPa | 0 C deg |
| 1732272180 | 973.1 hPa | 3.7 C deg | 57.3 % | 1006 hPa | 0 C deg |
| 1732270380 | 972.8 hPa | 4 C deg | 56.4 % | 1005.7 hPa | 0 C deg |
| 1732268580 | 972.6 hPa | 3.8 C deg | 56.5 % | 1005.5 hPa | 0 C deg |
| 1732266779 | 972 hPa | 3.8 C deg | 57.4 % | 1004.9 hPa | 0 C deg |
| 1732264979 | 971.3 hPa | 4.1 C deg | 57.5 % | 1004.1 hPa | 0 C deg |
| 1732263178 | 970.7 hPa | 4 C deg | 59.6 % | 1003.5 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)