This is the latest recevied telemetry packets stored in our database for station/object OK1TOR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU_temp* | Load* | Fmem* | Nodes[I]* | Dests[F]* |
|---|---|---|---|---|---|
| 1790610632 | 57.9 °C | 1.56 | 145 MB | 310 | 46 |
| 1790609420 | 63.3 °C | 2.25 | 145 MB | 301 | 46 |
| 1790605173 | 60.1 °C | 1.91 | 145 MB | 309 | 46 |
| 1790603961 | 62.3 °C | 1.43 | 117 MB | 310 | 46 |
| 1790602445 | 62.3 °C | 0.97 | 119 MB | 310 | 46 |
| 1790601232 | 66.6 °C | 1.58 | 117 MB | 310 | 46 |
| 1790599716 | 67.6 °C | 2.02 | 119 MB | 305 | 46 |
| 1790595773 | 66.6 °C | 1.92 | 125 MB | 303 | 46 |
| 1790594257 | 63.9 °C | 2.07 | 126 MB | 304 | 46 |
| 1790593045 | 60.1 °C | 1.5 | 131 MB | 304 | 46 |
| 1790592270 | 61.2 °C | 1.16 | 149 MB | 304 | 46 |
| 1790585224 | 60.6 °C | 1.58 | 163 MB | 307 | 46 |
| 1790582497 | 58.5 °C | 1.03 | 171 MB | 312 | 46 |
| 1790578553 | 56.3 °C | 0.79 | 203 MB | 306 | 46 |
| 1790577038 | 56.9 °C | 1.45 | 200 MB | 306 | 46 |
| 1790575826 | 55.8 °C | 1.32 | 200 MB | 306 | 46 |
| 1790573098 | 54.7 °C | 1.47 | 202 MB | 313 | 46 |
| 1790568857 | 55.3 °C | 0.78 | 243 MB | 317 | 46 |
| 1790567644 | 54.7 °C | 1.88 | 244 MB | 308 | 46 |
| 1790566129 | 54.7 °C | 1.3 | 242 MB | 308 | 46 |
| 1790564917 | 55.8 °C | 1.76 | 242 MB | 303 | 46 |
| 1790563402 | 57.9 °C | 1.45 | 245 MB | 303 | 46 |
| 1790559462 | 57.9 °C | 1.31 | 246 MB | 306 | 46 |
| 1790557947 | 59 °C | 1.41 | 248 MB | 309 | 46 |
*Used Equation Coefficients:
CPU_temp: 0, 0.1, 0
Load: 0, 0.01, 0
Fmem: 0, 1, 0
Nodes[I]: 0, 1, 0
Dests[F]: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)