This is the latest recevied telemetry packets stored in our database for station/object SV9TNF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Wifi* | RSSI* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274803 | 3.75 Volts | 100 % | -45 dBm | 0 | 0 |
| 1836274496 | 3.75 Volts | 100 % | -45 dBm | 0 | 0 |
| 1836274359 | 3.75 Volts | 100 % | -44 dBm | 0 | 0 |
| 1836274186 | 3.75 Volts | 100 % | -46 dBm | 0 | 0 |
| 1836273878 | 3.71 Volts | 100 % | -45 dBm | 0 | 0 |
| 1762361203 | 3.83 Volts | 78 % | -58 dBm | 0 | 0 |
| 1762360898 | 3.88 Volts | 82 % | -59 dBm | 0 | 0 |
| 1762360590 | 3.83 Volts | 78 % | -57 dBm | 0 | 0 |
| 1762360281 | 3.83 Volts | 80 % | -57 dBm | 0 | 0 |
| 1762359981 | 3.83 Volts | 82 % | -56 dBm | 0 | 0 |
| 1762359674 | 3.83 Volts | 82 % | -58 dBm | 0 | 0 |
| 1762359366 | 3.88 Volts | 82 % | -59 dBm | 0 | 0 |
| 1762359056 | 3.88 Volts | 78 % | -58 dBm | 0 | 0 |
| 1762358749 | 3.88 Volts | 78 % | -61 dBm | 0 | 0 |
| 1762358445 | 3.88 Volts | 80 % | -60 dBm | 0 | 0 |
| 1762358138 | 3.88 Volts | 78 % | -59 dBm | 0 | 0 |
| 1762357840 | 3.83 Volts | 80 % | -60 dBm | 0 | 0 |
| 1762357531 | 3.88 Volts | 78 % | -60 dBm | 0 | 0 |
| 1762357222 | 3.83 Volts | 76 % | -60 dBm | 0 | 0 |
| 1762356915 | 3.88 Volts | 74 % | -60 dBm | 0 | 0 |
| 1762356612 | 3.83 Volts | 80 % | -60 dBm | 0 | 0 |
| 1762356307 | 3.83 Volts | 74 % | -59 dBm | 0 | 0 |
| 1762355999 | 3.83 Volts | 78 % | -60 dBm | 0 | 0 |
| 1762355686 | 3.87 Volts | 74 % | -60 dBm | 0 | 0 |
| 1762355383 | 3.83 Volts | 70 % | -62 dBm | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Wifi: 0, 1, 0
RSSI: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)