This is the latest recevied telemetry packets stored in our database for station/object EA6ADB-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1792004353 | 10 | 34.6 C | 4.11 V | 130 M | 0 |
| 1792004192 | 10 | 34.9 C | 4.12 V | 140 M | 0 |
| 1792004032 | 9 | 34.7 C | 4.12 V | 140 M | 0 |
| 1792003870 | 10 | 34.8 C | 4.13 V | 140 M | 0 |
| 1792003228 | 10 | 34.8 C | 4.14 V | 160 M | 0 |
| 1792003068 | 10 | 34.7 C | 4.14 V | 170 M | 0 |
| 1792002909 | 10 | 34.4 C | 4.14 V | 170 M | 0 |
| 1792002270 | 9 | 34.8 C | 4.15 V | 220 M | 0 |
| 1792002109 | 9 | 34.7 C | 4.15 V | 210 M | 0 |
| 1792001947 | 9 | 35.1 C | 4.15 V | 210 M | 0 |
| 1792001784 | 8 | 35 C | 4.16 V | 190 M | 0 |
| 1792001637 | 9 | 34.9 C | 4.16 V | 200 M | 0 |
| 1792001476 | 8 | 34.8 C | 4.16 V | 200 M | 0 |
| 1792001313 | 8 | 34.9 C | 4.17 V | 220 M | 0 |
| 1792001153 | 8 | 34.9 C | 4.17 V | 210 M | 0 |
| 1792000989 | 10 | 34.9 C | 4.17 V | 230 M | 0 |
| 1791999545 | 5 | 35.6 C | 4.2 V | 310 M | 0 |
| 1791999382 | 9 | 35.4 C | 4.2 V | 350 M | 0 |
| 1791999221 | 8 | 35.6 C | 4.2 V | 390 M | 0 |
| 1791999060 | 9 | 35.7 C | 4.2 V | 360 M | 0 |
| 1791998897 | 8 | 35.6 C | 4.2 V | 330 M | 0 |
| 1791998737 | 7 | 35.6 C | 4.2 V | 310 M | 0 |
| 1791998576 | 9 | 35.6 C | 4.2 V | 330 M | 0 |
| 1791998417 | 9 | 35.6 C | 4.2 V | 340 M | 0 |
| 1791998257 | 7 | 35.8 C | 4.2 V | 420 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)