APRS Track Direct

My position About ☰

reset

SP2ROC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RPM*	VBAT*	TEMP*	TRIP*	MTH*
1790598548	1253 rpm	15.23 V	66 degC	0.6 km	68 h
1790598488	1218 rpm	15.23 V	67 degC	0.5 km	68 h
1790598458	1213 rpm	15.22 V	67 degC	0.5 km	68 h
1790598428	1049 rpm	15.24 V	67 degC	0.5 km	68 h
1790598368	921 rpm	15.21 V	67 degC	0.4 km	68 h
1790598338	1263 rpm	15.22 V	66 degC	0.4 km	68 h
1790598308	854 rpm	15.21 V	66 degC	0.4 km	68 h
1790598278	1204 rpm	15.23 V	66 degC	0.4 km	68 h
1790598248	1331 rpm	15.24 V	66 degC	0.3 km	68 h
1790598218	1261 rpm	15.22 V	65 degC	0.3 km	68 h
1790598188	1301 rpm	15.23 V	65 degC	0.3 km	68 h
1790598158	1188 rpm	15.22 V	65 degC	0.2 km	67 h
1790598129	1320 rpm	15.23 V	65 degC	0.2 km	67 h
1790598098	1276 rpm	15.24 V	65 degC	0.2 km	67 h
1790598038	764 rpm	15.14 V	65 degC	0.1 km	67 h
1790598008	766 rpm	15.14 V	65 degC	0.1 km	67 h
1790597978	765 rpm	15.14 V	64 degC	0.1 km	67 h
1790597948	764 rpm	15.15 V	64 degC	0.1 km	67 h
1790597918	765 rpm	15.14 V	64 degC	0.1 km	67 h
1790597888	764 rpm	15.15 V	64 degC	0.1 km	67 h
1790597858	765 rpm	15.15 V	63 degC	0.1 km	67 h
1790597828	763 rpm	15.16 V	63 degC	0.1 km	67 h
1790597798	766 rpm	15.15 V	62 degC	0.1 km	67 h
1790597768	764 rpm	15.15 V	61 degC	0.1 km	67 h
1790597738	761 rpm	15.14 V	60 degC	0.1 km	67 h

*Used Equation Coefficients:

RPM: 0, 1, 0

VBAT: 0, 0.01, 0

TEMP: 0, 1, -100

TRIP: 0, 0.1, 0

MTH: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)