This is the latest recevied telemetry packets stored in our database for station/object YB1CHAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791744286 | 33 °C | 70 %RH | 0 | 0 | 0 |
| 1791742509 | 33 °C | 70 %RH | 0 | 0 | 0 |
| 1791740732 | 33 °C | 68 %RH | 0 | 0 | 0 |
| 1791738955 | 32 °C | 75 %RH | 0 | 0 | 0 |
| 1791738529 | 33 °C | 69 %RH | 0 | 0 | 0 |
| 1791736752 | 32 °C | 69 %RH | 0 | 0 | 0 |
| 1791734975 | 33 °C | 71 %RH | 0 | 0 | 0 |
| 1791733198 | 33 °C | 66 %RH | 0 | 0 | 0 |
| 1791731421 | 33 °C | 66 %RH | 0 | 0 | 0 |
| 1791729644 | 33 °C | 66 %RH | 0 | 0 | 0 |
| 1791727867 | 34 °C | 65 %RH | 0 | 0 | 0 |
| 1791726090 | 34 °C | 64 %RH | 0 | 0 | 0 |
| 1791724313 | 34 °C | 67 %RH | 0 | 0 | 0 |
| 1791722536 | 34 °C | 64 %RH | 0 | 0 | 0 |
| 1791720759 | 34 °C | 64 %RH | 0 | 0 | 0 |
| 1791718982 | 34 °C | 63 %RH | 0 | 0 | 0 |
| 1791717205 | 35 °C | 63 %RH | 0 | 0 | 0 |
| 1791715428 | 35 °C | 60 %RH | 0 | 0 | 0 |
| 1791713652 | 35 °C | 60 %RH | 0 | 0 | 0 |
| 1791711874 | 35 °C | 59 %RH | 0 | 0 | 0 |
| 1791710098 | 36 °C | 58 %RH | 0 | 0 | 0 |
| 1791708321 | 36 °C | 57 %RH | 0 | 0 | 0 |
| 1791706544 | 36 °C | 56 %RH | 0 | 0 | 0 |
| 1791704767 | 36 °C | 55 %RH | 0 | 0 | 0 |
| 1791702990 | 37 °C | 54 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)