This is the latest recevied telemetry packets stored in our database for station/object XE2XEH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790631302 | 510 | 71 | 119 | 0 | 0 |
| 1790631003 | 580 | 30 | 119 | 0 | 0 |
| 1790630703 | 510 | 53 | 119 | 0 | 0 |
| 1790628903 | 620 | 20 | 119 | 0 | 0 |
| 1790628303 | 560 | 33 | 122 | 0 | 0 |
| 1790628003 | 620 | 40 | 119 | 0 | 0 |
| 1790627403 | 610 | 10 | 122 | 0 | 0 |
| 1790627103 | 560 | 20 | 119 | 0 | 0 |
| 1790626803 | 640 | 20 | 117 | 0 | 0 |
| 1790625603 | 660 | 10 | 124 | 0 | 0 |
| 1790625305 | 440 | 30 | 124 | 0 | 0 |
| 1790625003 | 590 | 68 | 124 | 0 | 0 |
| 1790624703 | 560 | 53 | 124 | 0 | 0 |
| 1790624403 | 650 | 33 | 124 | 0 | 0 |
| 1790623803 | 410 | 43 | 127 | 0 | 0 |
| 1790623203 | 530 | 33 | 130 | 0 | 0 |
| 1790622003 | 450 | 30 | 127 | 0 | 0 |
| 1790621703 | 500 | 20 | 130 | 0 | 0 |
| 1790620803 | 500 | 33 | 130 | 0 | 0 |
| 1790620204 | 630 | 10 | 119 | 0 | 0 |
| 1790619903 | 550 | 53 | 117 | 0 | 0 |
| 1790619004 | 710 | 244 | 102 | 0 | 0 |
| 1790618703 | 650 | 40 | 104 | 0 | 0 |
| 1790618403 | 740 | 68 | 109 | 0 | 0 |
| 1790618104 | 600 | 168 | 109 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)