This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | eGAS* | temp.out* |
|---|---|---|---|---|---|
| 1732288119 | 956.9 hPa | 27 C deg | 32.1 % | 51 - | 0 C deg |
| 1732284523 | 955.9 hPa | 26.7 C deg | 33.2 % | 50 - | 0 C deg |
| 1732282725 | 956 hPa | 26.7 C deg | 33 % | 50 - | 0 C deg |
| 1732280923 | 956 hPa | 26.5 C deg | 32.8 % | 51 - | 0 C deg |
| 1732279122 | 955.9 hPa | 26.8 C deg | 32.7 % | 50 - | 0 C deg |
| 1732277320 | 955.9 hPa | 26 C deg | 33.4 % | 50 - | 0 C deg |
| 1732275522 | 955.9 hPa | 25.6 C deg | 33.8 % | 51 - | 0 C deg |
| 1732273719 | 955.8 hPa | 25.3 C deg | 34.4 % | 51 - | 0 C deg |
| 1732271921 | 955.5 hPa | 24.7 C deg | 34.8 % | 52 - | 0 C deg |
| 1732270115 | 955.4 hPa | 24.1 C deg | 35.1 % | 53 - | 0 C deg |
| 1732268318 | 955 hPa | 23.5 C deg | 35.5 % | 53 - | 0 C deg |
| 1732266516 | 954.8 hPa | 23.4 C deg | 35.5 % | 54 - | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eGAS: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)