This is the latest recevied telemetry packets stored in our database for station/object EA9ABY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790648309 | 253 Count | 508 Count | 35 Count | 3.35 VDC | 0 VDC |
| 1790644705 | 252 Count | 508 Count | 35 Count | 3.34 VDC | 0 VDC |
| 1790641101 | 251 Count | 508 Count | 35 Count | 3.34 VDC | 0 VDC |
| 1790637497 | 250 Count | 508 Count | 35 Count | 3.37 VDC | 0 VDC |
| 1790633893 | 249 Count | 508 Count | 35 Count | 3.38 VDC | 0 VDC |
| 1790630289 | 248 Count | 508 Count | 35 Count | 3.39 VDC | 0 VDC |
| 1790626685 | 247 Count | 508 Count | 35 Count | 3.4 VDC | 0 VDC |
| 1790623081 | 246 Count | 508 Count | 35 Count | 3.4 VDC | 0 VDC |
| 1790619568 | 245 Count | 508 Count | 35 Count | 3.41 VDC | 0 VDC |
| 1790615965 | 244 Count | 508 Count | 35 Count | 3.41 VDC | 0 VDC |
| 1790612361 | 243 Count | 508 Count | 35 Count | 3.42 VDC | 0 VDC |
| 1790608757 | 242 Count | 508 Count | 35 Count | 3.41 VDC | 0 VDC |
| 1790605152 | 241 Count | 508 Count | 35 Count | 3.41 VDC | 0 VDC |
| 1790601548 | 240 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790597945 | 239 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790594341 | 238 Count | 508 Count | 35 Count | 3.46 VDC | 0 VDC |
| 1790590737 | 237 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790587133 | 236 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790583529 | 235 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790579925 | 234 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790576321 | 233 Count | 508 Count | 35 Count | 3.46 VDC | 0 VDC |
| 1790572717 | 232 Count | 508 Count | 35 Count | 3.45 VDC | 0 VDC |
| 1790569113 | 231 Count | 508 Count | 35 Count | 3.47 VDC | 0 VDC |
| 1790565510 | 230 Count | 508 Count | 35 Count | 3.47 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)