This is the latest recevied telemetry packets stored in our database for station/object TK5EP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | Hum* | Poids* | Value5* |
|---|---|---|---|---|---|
| 1790654628 | 4.17 V | 10 C | 86.5 % | 26 kg | 173 |
| 1790653806 | 4.17 V | 10 C | 86.5 % | 26 kg | 189 |
| 1790652982 | 4.17 V | 10 C | 86.5 % | 26 kg | 192 |
| 1790652114 | 4.17 V | 10.5 C | 86.5 % | 26 kg | 196 |
| 1790651290 | 4.17 V | 10.5 C | 86.5 % | 26 kg | 197 |
| 1790650466 | 4.17 V | 10.5 C | 86.5 % | 26 kg | 193 |
| 1790648818 | 4.17 V | 10.5 C | 86.5 % | 26 kg | 213 |
| 1790647994 | 4.17 V | 10.5 C | 86 % | 26 kg | 222 |
| 1790647127 | 4.17 V | 10.5 C | 86 % | 26 kg | 219 |
| 1790646303 | 4.17 V | 10.5 C | 86 % | 26 kg | 214 |
| 1790645479 | 4.17 V | 11 C | 86 % | 26 kg | 227 |
| 1790644655 | 4.17 V | 11 C | 86 % | 26 kg | 233 |
| 1790643831 | 4.17 V | 11 C | 86 % | 26 kg | 245 |
| 1790643007 | 4.17 V | 11 C | 85.5 % | 26 kg | 247 |
| 1790642139 | 4.17 V | 11 C | 85.5 % | 26.25 kg | 2 |
| 1790641315 | 4.17 V | 11.5 C | 85.5 % | 26.25 kg | 5 |
| 1790640491 | 4.17 V | 11.5 C | 85.5 % | 26.25 kg | 11 |
| 1790639667 | 4.17 V | 11.5 C | 85 % | 26.25 kg | 20 |
| 1790638843 | 4.17 V | 11.5 C | 85 % | 26.25 kg | 25 |
| 1790638019 | 4.17 V | 11.5 C | 85 % | 26.25 kg | 23 |
| 1790637150 | 4.17 V | 11.5 C | 84.5 % | 26.25 kg | 34 |
| 1790636327 | 4.17 V | 11.5 C | 84.5 % | 26.25 kg | 40 |
| 1790635502 | 4.17 V | 11.5 C | 84.5 % | 26.25 kg | 54 |
| 1790634678 | 4.17 V | 12 C | 84.5 % | 26.25 kg | 44 |
| 1790633030 | 4.17 V | 12 C | 84 % | 26.25 kg | 52 |
*Used Equation Coefficients:
Vbat: 0, 0.008, 2.5
Temp: 0, 0.5, -40
Hum: 0, 0.5, 0
Poids: 0, 0.25, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)