APRS Track Direct

My position About ☰

reset

IU4BUQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1790647150	13.58 Volt	1160 Pkt	290 Pkt	58 Pcnt	24.5 C
1790647148	13.58 Volt	1160 Pkt	290 Pkt	58 Pcnt	24.5 C
1790646848	13.58 Volt	1160 Pkt	290 Pkt	57 Pcnt	24.5 C
1790646549	13.5 Volt	1170 Pkt	280 Pkt	58 Pcnt	24.5 C
1790646548	13.5 Volt	1170 Pkt	280 Pkt	58 Pcnt	24.5 C
1790646248	13.58 Volt	1150 Pkt	270 Pkt	57 Pcnt	24.5 C
1790645949	13.58 Volt	1150 Pkt	280 Pkt	57 Pcnt	24.5 C
1790645948	13.58 Volt	1150 Pkt	280 Pkt	57 Pcnt	24.5 C
1790645648	13.58 Volt	1170 Pkt	270 Pkt	58 Pcnt	24.5 C
1790645349	13.58 Volt	1210 Pkt	270 Pkt	59 Pcnt	24.5 C
1790645348	13.58 Volt	1210 Pkt	270 Pkt	59 Pcnt	24.5 C
1790645048	13.58 Volt	1220 Pkt	260 Pkt	58 Pcnt	24.5 C
1790644750	13.58 Volt	1240 Pkt	260 Pkt	58 Pcnt	24.5 C
1790644748	13.58 Volt	1240 Pkt	260 Pkt	58 Pcnt	24.5 C
1790644449	13.58 Volt	1230 Pkt	260 Pkt	59 Pcnt	24.5 C
1790644149	13.58 Volt	1260 Pkt	250 Pkt	59 Pcnt	24.5 C
1790644148	13.58 Volt	1260 Pkt	250 Pkt	59 Pcnt	24.5 C
1790643848	13.58 Volt	1270 Pkt	260 Pkt	59 Pcnt	24.5 C
1790643549	13.58 Volt	1260 Pkt	260 Pkt	59 Pcnt	24.5 C
1790643549	13.58 Volt	1260 Pkt	260 Pkt	59 Pcnt	24.5 C
1790643248	13.58 Volt	1250 Pkt	260 Pkt	58 Pcnt	24.5 C
1790642949	13.58 Volt	1240 Pkt	270 Pkt	58 Pcnt	24.5 C
1790642948	13.58 Volt	1240 Pkt	270 Pkt	58 Pcnt	24.5 C
1790642649	13.58 Volt	1240 Pkt	270 Pkt	58 Pcnt	24.5 C
1790642350	13.58 Volt	1220 Pkt	260 Pkt	57 Pcnt	24.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)