APRS Track Direct

My position About ☰

reset

DG2NPE-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG2NPE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1791732200	965.1 hPa	22 C deg	1010.7 hPa	12.9 C deg
1791730370	964.8 hPa	22.9 C deg	1010.2 hPa	14.8 C deg
1791728540	964.5 hPa	23.2 C deg	1009.9 hPa	14.5 C deg
1791726710	964.5 hPa	24.2 C deg	1009.7 hPa	17.2 C deg
1791724880	964.5 hPa	23 C deg	1009.9 hPa	15.1 C deg
1791723050	964.3 hPa	22.5 C deg	1009.7 hPa	14.3 C deg
1791721220	964.3 hPa	23 C deg	1009.7 hPa	15.1 C deg
1791719390	964.3 hPa	22.4 C deg	1009.8 hPa	12.8 C deg
1791717560	964.3 hPa	22.5 C deg	1009.8 hPa	13.1 C deg
1791713900	964.7 hPa	21.4 C deg	1010.4 hPa	10.1 C deg
1791712070	964.7 hPa	21.5 C deg	1010.4 hPa	10.8 C deg
1791710240	964.7 hPa	22 C deg	1010.3 hPa	10.1 C deg
1791708410	964.7 hPa	21.4 C deg	1010.4 hPa	9.6 C deg
1791706580	964.7 hPa	21.2 C deg	1010.4 hPa	9.6 C deg
1791704750	964.7 hPa	20.5 C deg	1010.5 hPa	0 C deg
1791702842	964.4 hPa	20.4 C deg	964.4 hPa	0 C deg
1791702400	964.4 hPa	20.4 C deg	1010.6 hPa	0 C deg
1791700570	964.4 hPa	20.1 C deg	1010.6 hPa	0 C deg
1791698740	964.3 hPa	20 C deg	1010.6 hPa	0 C deg
1791696910	964.2 hPa	20.3 C deg	1010.4 hPa	0 C deg
1791695080	964.2 hPa	20.9 C deg	1010.3 hPa	0 C deg
1791693250	964.1 hPa	19.7 C deg	1010.4 hPa	0 C deg
1791691420	964.1 hPa	21 C deg	1010.2 hPa	0 C deg
1791689591	964.1 hPa	21.2 C deg	1010.1 hPa	0 C deg
1791687766	964.1 hPa	21.1 C deg	1010.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)