APRS Track Direct

My position About ☰

reset

HB9BB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9BB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732257859	13.58 Volt	860 Pkt	390 Pkt	60 Pcnt
1732257562	13.58 Volt	860 Pkt	390 Pkt	62 Pcnt
1732257559	13.58 Volt	860 Pkt	390 Pkt	62 Pcnt
1732257259	13.58 Volt	870 Pkt	380 Pkt	62 Pcnt
1732256964	13.43 Volt	860 Pkt	380 Pkt	62 Pcnt
1732256959	13.43 Volt	860 Pkt	380 Pkt	62 Pcnt
1732256660	13.5 Volt	860 Pkt	370 Pkt	63 Pcnt
1732256364	13.58 Volt	860 Pkt	370 Pkt	64 Pcnt
1732256359	13.58 Volt	860 Pkt	370 Pkt	64 Pcnt
1732256059	13.58 Volt	870 Pkt	380 Pkt	65 Pcnt
1732255760	13.43 Volt	860 Pkt	370 Pkt	65 Pcnt
1732255760	13.43 Volt	860 Pkt	370 Pkt	65 Pcnt
1732255460	13.43 Volt	850 Pkt	370 Pkt	64 Pcnt
1732255162	13.5 Volt	850 Pkt	380 Pkt	64 Pcnt
1732255160	13.5 Volt	850 Pkt	380 Pkt	64 Pcnt
1732254860	13.58 Volt	830 Pkt	370 Pkt	64 Pcnt
1732254561	13.43 Volt	820 Pkt	370 Pkt	64 Pcnt
1732254560	13.43 Volt	820 Pkt	370 Pkt	64 Pcnt
1732254260	13.58 Volt	820 Pkt	370 Pkt	63 Pcnt
1732253964	13.58 Volt	800 Pkt	360 Pkt	62 Pcnt
1732253960	13.58 Volt	800 Pkt	360 Pkt	62 Pcnt
1732253660	13.58 Volt	810 Pkt	370 Pkt	62 Pcnt
1732253369	13.58 Volt	810 Pkt	360 Pkt	62 Pcnt
1732253360	13.58 Volt	810 Pkt	360 Pkt	62 Pcnt
1732253060	13.58 Volt	810 Pkt	360 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)