APRS Track Direct

My position About ☰

reset

WC4PEM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1745051020	26.5 C	14.25 Volt	180 Pkt	440 Pkt	54 Pcnt
1745050721	26.5 C	14.18 Volt	190 Pkt	450 Pkt	55 Pcnt
1745050421	26 C	14.25 Volt	190 Pkt	450 Pkt	54 Pcnt
1745050121	25.5 C	14.25 Volt	190 Pkt	460 Pkt	54 Pcnt
1745049821	26 C	14.25 Volt	190 Pkt	470 Pkt	55 Pcnt
1745049521	26.5 C	14.25 Volt	190 Pkt	480 Pkt	56 Pcnt
1745049221	26 C	14.25 Volt	190 Pkt	500 Pkt	57 Pcnt
1745048921	25.5 C	14.25 Volt	200 Pkt	510 Pkt	59 Pcnt
1745048621	25.5 C	14.25 Volt	200 Pkt	530 Pkt	61 Pcnt
1745048321	26.5 C	14.25 Volt	200 Pkt	540 Pkt	62 Pcnt
1745048021	26.5 C	14.25 Volt	210 Pkt	570 Pkt	65 Pcnt
1745047721	25.5 C	14.25 Volt	210 Pkt	590 Pkt	66 Pcnt
1745047421	25.5 C	14.25 Volt	200 Pkt	590 Pkt	66 Pcnt
1745047121	26 C	14.25 Volt	200 Pkt	600 Pkt	67 Pcnt
1745046821	26.5 C	14.25 Volt	210 Pkt	600 Pkt	68 Pcnt
1745046521	26 C	14.25 Volt	210 Pkt	610 Pkt	68 Pcnt
1745046221	25.5 C	14.25 Volt	210 Pkt	630 Pkt	69 Pcnt
1745045921	25.5 C	14.25 Volt	210 Pkt	620 Pkt	68 Pcnt
1745045621	26.5 C	14.25 Volt	200 Pkt	610 Pkt	68 Pcnt
1745045321	26 C	14.25 Volt	210 Pkt	610 Pkt	67 Pcnt
1745045021	25.5 C	14.25 Volt	210 Pkt	610 Pkt	66 Pcnt
1745044721	25.5 C	14.25 Volt	200 Pkt	590 Pkt	66 Pcnt
1745044421	26 C	14.25 Volt	200 Pkt	590 Pkt	65 Pcnt
1745044121	26.5 C	14.25 Volt	200 Pkt	590 Pkt	63 Pcnt
1745043821	26 C	14.25 Volt	200 Pkt	600 Pkt	64 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)