APRS Track Direct

My position About ☰

reset

IR2UFW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2UFW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1732296034	51 Pkt	320 Pkt	0 Pkt	2.1 Pcnt	74 Pcnt
1732295733	34 Pkt	330 Pkt	1 Pkt	2.1 Pcnt	72 Pcnt
1732295433	36 Pkt	350 Pkt	1 Pkt	2.1 Pcnt	71 Pcnt
1732295133	33 Pkt	380 Pkt	0 Pkt	2.1 Pcnt	72 Pcnt
1732294833	34 Pkt	400 Pkt	0 Pkt	2.1 Pcnt	73 Pcnt
1732294532	36 Pkt	400 Pkt	0 Pkt	2.1 Pcnt	73 Pcnt
1732294232	44 Pkt	400 Pkt	0 Pkt	2.1 Pcnt	74 Pcnt
1732293932	48 Pkt	390 Pkt	1 Pkt	2.1 Pcnt	75 Pcnt
1732293631	59 Pkt	390 Pkt	8 Pkt	2.1 Pcnt	75 Pcnt
1732293331	75 Pkt	380 Pkt	6 Pkt	2.1 Pcnt	76 Pcnt
1732293031	77 Pkt	360 Pkt	0 Pkt	2.1 Pcnt	76 Pcnt
1732292730	77 Pkt	330 Pkt	0 Pkt	2.1 Pcnt	75 Pcnt
1732292430	78 Pkt	310 Pkt	0 Pkt	2.1 Pcnt	75 Pcnt
1732292130	78 Pkt	280 Pkt	0 Pkt	2.1 Pcnt	77 Pcnt
1732291830	71 Pkt	260 Pkt	1 Pkt	2.1 Pcnt	78 Pcnt
1732291529	45 Pkt	230 Pkt	1 Pkt	2.1 Pcnt	77 Pcnt
1732291229	34 Pkt	210 Pkt	0 Pkt	2.1 Pcnt	78 Pcnt
1732290929	39 Pkt	220 Pkt	0 Pkt	2.1 Pcnt	77 Pcnt
1732290629	42 Pkt	240 Pkt	0 Pkt	2.1 Pcnt	77 Pcnt
1732290328	43 Pkt	260 Pkt	0 Pkt	2.1 Pcnt	77 Pcnt
1732290028	34 Pkt	260 Pkt	0 Pkt	2.1 Pcnt	75 Pcnt
1732289728	26 Pkt	260 Pkt	0 Pkt	2.1 Pcnt	75 Pcnt
1732289427	32 Pkt	270 Pkt	0 Pkt	2.1 Pcnt	74 Pcnt
1732289127	37 Pkt	280 Pkt	0 Pkt	2.1 Pcnt	74 Pcnt
1732288827	32 Pkt	280 Pkt	0 Pkt	2.1 Pcnt	74 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)