APRS Track Direct

My position About ☰

reset

9W8AKN-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W8AKN-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1791742918	4 Pkt	2 Pkt	0 Pkt	-65 dBm	5.17 V
1791741092	3 Pkt	2 Pkt	0 Pkt	-65 dBm	5.17 V
1791739266	3 Pkt	3 Pkt	0 Pkt	-64 dBm	5.17 V
1791737440	3 Pkt	2 Pkt	0 Pkt	-64 dBm	5.17 V
1791735615	3 Pkt	2 Pkt	0 Pkt	-65 dBm	5.17 V
1791733789	3 Pkt	2 Pkt	0 Pkt	-65 dBm	5.17 V
1791731963	4 Pkt	2 Pkt	0 Pkt	-65 dBm	5.13 V
1791730137	3 Pkt	2 Pkt	0 Pkt	-64 dBm	5.17 V
1791728311	3 Pkt	5 Pkt	0 Pkt	-66 dBm	5.17 V
1791726485	3 Pkt	5 Pkt	0 Pkt	-67 dBm	5.17 V
1791724659	2 Pkt	20 Pkt	0 Pkt	-67 dBm	5.19 V
1791722833	3 Pkt	4 Pkt	0 Pkt	-72 dBm	5.17 V
1791721006	3 Pkt	4 Pkt	0 Pkt	-75 dBm	5.17 V
1791719180	3 Pkt	4 Pkt	0 Pkt	-71 dBm	5.17 V
1791717354	3 Pkt	4 Pkt	0 Pkt	-73 dBm	5.17 V
1791715528	3 Pkt	6 Pkt	1 Pkt	-70 dBm	5.17 V
1791713702	2 Pkt	9 Pkt	1 Pkt	-71 dBm	5.19 V
1791711876	2 Pkt	4 Pkt	7 Pkt	-73 dBm	5.17 V
1791710051	2 Pkt	23 Pkt	5 Pkt	-70 dBm	5.17 V
1791708223	0 Pkt	5 Pkt	0 Pkt	-70 dBm	5.13 V
1791706398	0 Pkt	9 Pkt	0 Pkt	-66 dBm	5.19 V
1791704572	0 Pkt	2 Pkt	0 Pkt	-68 dBm	5.17 V
1791702747	0 Pkt	1 Pkt	0 Pkt	-68 dBm	5.17 V
1791700922	0 Pkt	1 Pkt	0 Pkt	-71 dBm	5.17 V
1791699096	0 Pkt	5 Pkt	0 Pkt	-68 dBm	5.17 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)