This is the latest recevied telemetry packets stored in our database for station/object W6SCR-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | SARbatt* | SPIbat* | Temp* | Rx1h* |
|---|---|---|---|---|---|
| 1790660206 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 340 Pkt |
| 1790660206 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 340 Pkt |
| 1790659905 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 340 Pkt |
| 1790659607 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 340 Pkt |
| 1790659305 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 350 Pkt |
| 1790659005 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 350 Pkt |
| 1790658704 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 360 Pkt |
| 1790658404 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 72.5 F | 360 Pkt |
| 1790658104 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 380 Pkt |
| 1790657803 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 380 Pkt |
| 1790657503 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 390 Pkt |
| 1790657203 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 390 Pkt |
| 1790656903 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 360 Pkt |
| 1790656602 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 370 Pkt |
| 1790656002 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 370 Pkt |
| 1790655702 | 13.65 Volt | 13.2 Volt | 12.8 Volt | 73.4 F | 370 Pkt |
| 1790655702 | - | - | - | - | - |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
SARbatt: 0, 0.1, 0
SPIbat: 0, 0.1, 0
Temp: 0, 0.9, -83.2
Rx1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)