APRS Track Direct

My position About ☰

reset

AC4AG-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AC4AG-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732286512	13.95 Volt	670 Pkt	130 Pkt	70 Pcnt
1732286221	13.95 Volt	660 Pkt	130 Pkt	71 Pcnt
1732286212	13.95 Volt	660 Pkt	130 Pkt	71 Pcnt
1732285912	13.95 Volt	680 Pkt	120 Pkt	71 Pcnt
1732285614	13.95 Volt	690 Pkt	130 Pkt	72 Pcnt
1732285612	13.95 Volt	690 Pkt	130 Pkt	72 Pcnt
1732285312	13.95 Volt	690 Pkt	120 Pkt	72 Pcnt
1732285013	13.95 Volt	670 Pkt	120 Pkt	72 Pcnt
1732285012	13.95 Volt	670 Pkt	120 Pkt	72 Pcnt
1732284712	13.95 Volt	670 Pkt	110 Pkt	72 Pcnt
1732284412	13.95 Volt	670 Pkt	110 Pkt	74 Pcnt
1732284412	13.95 Volt	670 Pkt	110 Pkt	74 Pcnt
1732284112	13.95 Volt	660 Pkt	110 Pkt	74 Pcnt
1732283814	13.43 Volt	690 Pkt	120 Pkt	74 Pcnt
1732283812	13.43 Volt	690 Pkt	120 Pkt	74 Pcnt
1732283729	13.65 Volt	680 Pkt	110 Pkt	75 Pcnt
1732283512	13.95 Volt	690 Pkt	120 Pkt	75 Pcnt
1732283214	13.65 Volt	680 Pkt	110 Pkt	75 Pcnt
1732283212	13.65 Volt	680 Pkt	110 Pkt	75 Pcnt
1732282912	13.95 Volt	700 Pkt	120 Pkt	76 Pcnt
1732282614	13.95 Volt	690 Pkt	110 Pkt	77 Pcnt
1732282612	13.95 Volt	690 Pkt	110 Pkt	77 Pcnt
1732282312	13.95 Volt	680 Pkt	110 Pkt	76 Pcnt
1732282013	13.95 Volt	690 Pkt	110 Pkt	77 Pcnt
1732282012	13.95 Volt	690 Pkt	110 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Te: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)