This is the latest recevied telemetry packets stored in our database for station/object DO9HM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790622670 | 14.9 deg C | 65.7 % | 1022.4 hPa | 0 | 0 |
| 1790621774 | 15.2 deg C | 64.6 % | 1022.4 hPa | 0 | 0 |
| 1790620869 | 15.6 deg C | 63.2 % | 1022.3 hPa | 0 | 0 |
| 1790619966 | 15.9 deg C | 61.9 % | 1022.1 hPa | 0 | 0 |
| 1790619065 | 16.6 deg C | 59.9 % | 1021.9 hPa | 0 | 0 |
| 1790618161 | 17.3 deg C | 58 % | 1021.6 hPa | 0 | 0 |
| 1790617262 | 17.4 deg C | 56.8 % | 1021.4 hPa | 0 | 0 |
| 1790616362 | 18.4 deg C | 53.8 % | 1021.1 hPa | 0 | 0 |
| 1790615461 | 18.9 deg C | 52.6 % | 1020.8 hPa | 0 | 0 |
| 1790614558 | 19.6 deg C | 51.3 % | 1020.7 hPa | 0 | 0 |
| 1790613660 | 20.5 deg C | 49.6 % | 1020.4 hPa | 0 | 0 |
| 1790612755 | 21.3 deg C | 47.4 % | 1020.2 hPa | 0 | 0 |
| 1790611858 | 22 deg C | 45.5 % | 1020 hPa | 0 | 0 |
| 1790610959 | 22.5 deg C | 44.5 % | 1019.8 hPa | 0 | 0 |
| 1790610055 | 23 deg C | 43.5 % | 1019.7 hPa | 0 | 0 |
| 1790609156 | 23.3 deg C | 42.7 % | 1019.6 hPa | 0 | 0 |
| 1790608258 | 23.6 deg C | 42.1 % | 1019.6 hPa | 0 | 0 |
| 1790607362 | 24.1 deg C | 42 % | 1019.6 hPa | 0 | 0 |
| 1790606464 | 24.1 deg C | 41.9 % | 1019.7 hPa | 0 | 0 |
| 1790605561 | 24.3 deg C | 41.9 % | 1019.7 hPa | 0 | 0 |
| 1790604660 | 24.5 deg C | 43.5 % | 1019.6 hPa | 0 | 0 |
| 1790603759 | 24.6 deg C | 43.3 % | 1019.8 hPa | 0 | 0 |
| 1790602863 | 24.5 deg C | 44.8 % | 1019.9 hPa | 0 | 0 |
| 1790601967 | 24.5 deg C | 45.2 % | 1019.8 hPa | 0 | 0 |
| 1790601063 | 24.2 deg C | 45 % | 1020 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)