This is the latest recevied telemetry packets stored in our database for station/object NWCSTL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Supply* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787091838 | 13.29 V | -0 | 0 | 0 | 0 |
| 1787089829 | 13.28 V | -0 | 0 | 0 | 0 |
| 1787087822 | 13.28 V | -0.01 | 0 | 0 | 0 |
| 1787085811 | 12.95 V | -0.01 | -0 | 0 | 0 |
| 1787083802 | 13.1 V | -0 | 0 | 0 | 0 |
| 1787081795 | 12.96 V | -0 | -0.01 | 0 | 0 |
| 1787079785 | 12.97 V | -0.01 | 0 | 0 | 0 |
| 1787075766 | 14.41 V | -0.01 | -0 | 0 | 0 |
| 1787073757 | 13.87 V | -0 | 0 | 0 | 0 |
| 1787071751 | 14.08 V | -0 | 0 | 0 | 0 |
| 1787069739 | 14.15 V | -0 | -0 | 0 | 0 |
| 1787067730 | 12.74 V | -0.01 | 0 | 0 | 0 |
| 1787065723 | 13.15 V | -0 | 0 | 0 | 0 |
| 1787063712 | 12.91 V | -0.01 | -0 | 0 | 0 |
| 1787061704 | 13.04 V | -0.01 | -0 | 0 | 0 |
| 1787059694 | 12.68 V | -0 | -0 | 0 | 0 |
| 1787057685 | 13.01 V | -0.01 | -0 | 0 | 0 |
| 1787055678 | 13.01 V | -0.01 | 0 | 0 | 0 |
| 1787053668 | 12.91 V | -0.01 | 0 | 0 | 0 |
| 1787051658 | 13 V | -0.01 | -0 | 0 | 0 |
| 1787049650 | 13.01 V | -0 | 0.01 | 0 | 0 |
| 1787045631 | 13 V | -0.01 | 0 | 0 | 0 |
| 1787043622 | 12.68 V | -0 | 0 | 0 | 0 |
| 1787041615 | 12.68 V | -0 | 0 | 0 | 0 |
| 1787039604 | 12.67 V | -0 | -0 | 0 | 0 |
*Used Equation Coefficients:
Supply: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)