This is the latest recevied telemetry packets stored in our database for station/object DB0MMR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1732286071 | 948.5 hPa | 3.4 C deg | 0 % | 1010.6 hPa | 0 C deg |
| 1732284263 | 948 hPa | 3.7 C deg | 0 % | 1010 hPa | 0 C deg |
| 1732282466 | 947.5 hPa | 3.7 C deg | 0 % | 1009.4 hPa | 0 C deg |
| 1732280668 | 947 hPa | 4.2 C deg | 0 % | 1008.8 hPa | 0 C deg |
| 1732278865 | 947.1 hPa | 5 C deg | 0 % | 1008.7 hPa | 0 C deg |
| 1732277069 | 946.6 hPa | 3.9 C deg | 0 % | 1008.4 hPa | 0 C deg |
| 1732273461 | 946.7 hPa | 6 C deg | 0 % | 1008 hPa | 0 C deg |
| 1732269861 | 946 hPa | 7 C deg | 0 % | 1007 hPa | 0 C deg |
| 1732268065 | 945.9 hPa | 7 C deg | 0 % | 1007 hPa | 0 C deg |
| 1732264478 | 944.6 hPa | 6.4 C deg | 0 % | 1005.7 hPa | 0 C deg |
| 1732262672 | 945 hPa | 4.8 C deg | 0 % | 1006.5 hPa | 0 C deg |
| 1732260860 | 945.1 hPa | 2.8 C deg | 0 % | 1007.1 hPa | 0 C deg |
| 1732259066 | 945 hPa | 1.2 C deg | 0 % | 1007.3 hPa | 0 C deg |
| 1732257281 | 944.4 hPa | 0.7 C deg | 0 % | 1006.8 hPa | 0 C deg |
| 1732255466 | 943 hPa | 1.3 C deg | 0 % | 1005.2 hPa | 0 C deg |
| 1732253676 | 942.4 hPa | 1.4 C deg | 0 % | 1004.5 hPa | 0 C deg |
| 1732251864 | 941.3 hPa | 1.4 C deg | 0 % | 1003.4 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)