APRS Track Direct

My position About ☰

reset

9M2OCX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2OCX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1749328121	42 Pkt	20 Pkt	0 Pkt	-50 dBm	0.06 V
1749326295	1 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V
1749324529	33 Pkt	30 Pkt	0 Pkt	-51 dBm	0.06 V
1749322702	39 Pkt	15 Pkt	0 Pkt	-51 dBm	0.04 V
1749319986	4 Pkt	1 Pkt	0 Pkt	-56 dBm	0.06 V
1749318184	42 Pkt	20 Pkt	0 Pkt	-52 dBm	0.06 V
1749316356	6 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V
1749316027	45 Pkt	30 Pkt	0 Pkt	-50 dBm	0.06 V
1749314199	40 Pkt	19 Pkt	0 Pkt	-50 dBm	0.06 V
1749312325	2 Pkt	0 Pkt	0 Pkt	-51 dBm	0.06 V
1749310963	36 Pkt	33 Pkt	0 Pkt	-51 dBm	0.06 V
1749309022	34 Pkt	20 Pkt	1 Pkt	-53 dBm	0.06 V
1749306038	3 Pkt	0 Pkt	0 Pkt	-53 dBm	0.04 V
1749305888	38 Pkt	32 Pkt	0 Pkt	-52 dBm	0.06 V
1749303899	34 Pkt	35 Pkt	0 Pkt	-54 dBm	0.06 V
1749302024	50 Pkt	27 Pkt	0 Pkt	-53 dBm	0.06 V
1749300174	36 Pkt	22 Pkt	0 Pkt	-52 dBm	0.06 V
1749298348	1 Pkt	0 Pkt	0 Pkt	-48 dBm	0.06 V
1749296585	44 Pkt	24 Pkt	0 Pkt	-47 dBm	0.06 V
1749294757	1 Pkt	0 Pkt	0 Pkt	-51 dBm	0.06 V
1749292971	52 Pkt	31 Pkt	0 Pkt	-51 dBm	0.06 V
1749291144	50 Pkt	21 Pkt	0 Pkt	-50 dBm	0.06 V
1749289318	3 Pkt	0 Pkt	0 Pkt	-49 dBm	0.06 V
1749288722	50 Pkt	29 Pkt	0 Pkt	-51 dBm	0.06 V
1749286894	54 Pkt	18 Pkt	0 Pkt	-51 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)