This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758223382 | 75 Count | 466 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1758222481 | 74 Count | 461 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1758221580 | 73 Count | 455 Count | 0 Count | 4.81 VDC | 0 VDC |
| 1758220681 | 72 Count | 449 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1758219779 | 71 Count | 443 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1758218879 | 70 Count | 437 Count | 0 Count | 4.54 VDC | 0 VDC |
| 1758217978 | 69 Count | 428 Count | 0 Count | 4.56 VDC | 0 VDC |
| 1758217077 | 68 Count | 423 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1758216191 | 67 Count | 417 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1758215290 | 66 Count | 412 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1758214390 | 65 Count | 406 Count | 0 Count | 4.13 VDC | 0 VDC |
| 1758213489 | 64 Count | 401 Count | 0 Count | 4.62 VDC | 0 VDC |
| 1758212589 | 63 Count | 396 Count | 0 Count | 4.55 VDC | 0 VDC |
| 1758211688 | 62 Count | 391 Count | 0 Count | 4.8 VDC | 0 VDC |
| 1758210787 | 61 Count | 384 Count | 0 Count | 4.64 VDC | 0 VDC |
| 1758209887 | 60 Count | 380 Count | 0 Count | 4.71 VDC | 0 VDC |
| 1758208986 | 59 Count | 375 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1758208085 | 58 Count | 370 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1758207185 | 57 Count | 364 Count | 0 Count | 4.73 VDC | 0 VDC |
| 1758206284 | 56 Count | 358 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1758205384 | 55 Count | 352 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1758204483 | 54 Count | 347 Count | 0 Count | 4.58 VDC | 0 VDC |
| 1758203582 | 53 Count | 341 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1758202682 | 52 Count | 335 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1758201781 | 51 Count | 329 Count | 0 Count | 4.31 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)