APRS Track Direct

My position About ☰

reset

E22UMT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22UMT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1786743305	1 Pkt	0 Pkt	-74 dBm	8.18 V
1786741479	2 Pkt	2 Pkt	-74 dBm	8.2 V
1786739653	1 Pkt	0 Pkt	-75 dBm	8.22 V
1786737828	1 Pkt	0 Pkt	-74 dBm	8.22 V
1786736003	2 Pkt	0 Pkt	-74 dBm	8.26 V
1786734177	1 Pkt	0 Pkt	-73 dBm	8.22 V
1786732351	1 Pkt	0 Pkt	-73 dBm	8.37 V
1786730526	1 Pkt	1 Pkt	-73 dBm	8.26 V
1786728700	3 Pkt	0 Pkt	-76 dBm	8.26 V
1786726874	2 Pkt	1 Pkt	-75 dBm	8.31 V
1786725049	1 Pkt	0 Pkt	-74 dBm	8.37 V
1786723224	2 Pkt	2 Pkt	-73 dBm	8.41 V
1786721398	2 Pkt	0 Pkt	-73 dBm	8.31 V
1786719572	2 Pkt	0 Pkt	-75 dBm	8.37 V
1786717747	1 Pkt	0 Pkt	-73 dBm	8.37 V
1786715921	2 Pkt	0 Pkt	-73 dBm	8.43 V
1786714096	2 Pkt	0 Pkt	-73 dBm	8.45 V
1786712271	2 Pkt	0 Pkt	-75 dBm	8.45 V
1786710444	1 Pkt	0 Pkt	-75 dBm	8.49 V
1786708618	2 Pkt	0 Pkt	-75 dBm	8.82 V
1786706793	1 Pkt	1 Pkt	-73 dBm	10.62 V
1786704967	5 Pkt	1 Pkt	-72 dBm	11.14 V
1786703142	2 Pkt	0 Pkt	-74 dBm	11.63 V
1786701316	1 Pkt	0 Pkt	-75 dBm	12.37 V
1786699491	2 Pkt	16 Pkt	-73 dBm	12.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)