This is the latest recevied telemetry packets stored in our database for station/object OK4JL-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786787548 | 4.55 V | 31 | 0 | 0 | 0 |
| 1786787488 | 4.54 V | 32 | 0 | 0 | 0 |
| 1786787428 | 4.54 V | 29 | 0 | 0 | 0 |
| 1786787368 | 4.83 V | 29 | 0 | 0 | 0 |
| 1786787308 | 4.52 V | 30 | 0 | 0 | 0 |
| 1786787248 | 4.56 V | 31 | 0 | 0 | 0 |
| 1786787188 | 4.55 V | 31 | 0 | 0 | 0 |
| 1786787128 | 4.58 V | 31 | 0 | 0 | 0 |
| 1786787068 | 4.56 V | 32 | 0 | 0 | 0 |
| 1786787008 | 4.56 V | 32 | 0 | 0 | 0 |
| 1786786948 | 4.56 V | 29 | 0 | 0 | 0 |
| 1786786888 | 4.29 V | 31 | 0 | 0 | 0 |
| 1786786828 | 4.59 V | 29 | 0 | 0 | 0 |
| 1786786768 | 4.59 V | 30 | 0 | 0 | 0 |
| 1786786708 | 4.52 V | 30 | 0 | 0 | 0 |
| 1786786648 | 4.63 V | 29 | 0 | 0 | 0 |
| 1786786588 | 4.57 V | 30 | 0 | 0 | 0 |
| 1786786528 | 4.57 V | 30 | 0 | 0 | 0 |
| 1786786468 | 4.58 V | 29 | 0 | 0 | 0 |
| 1786786408 | 4.56 V | 29 | 0 | 0 | 0 |
| 1786786348 | 4.56 V | 29 | 0 | 0 | 0 |
| 1786786288 | 4.43 V | 28 | 0 | 0 | 0 |
| 1786786230 | 4.56 V | 29 | 0 | 0 | 0 |
| 1786786168 | 4.54 V | 31 | 0 | 0 | 0 |
| 1786786108 | 4.53 V | 31 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)