This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792036715 | 744 Count | 150 Count | 150 Count | 4.25 VDC | 0.14 VDC |
| 1792036477 | 743 Count | 150 Count | 150 Count | 4.29 VDC | 0.14 VDC |
| 1792034672 | 741 Count | 150 Count | 150 Count | 4.28 VDC | 0.14 VDC |
| 1792032866 | 734 Count | 145 Count | 145 Count | 4.26 VDC | 0.14 VDC |
| 1792032719 | 733 Count | 145 Count | 145 Count | 4.32 VDC | 0.14 VDC |
| 1792030914 | 729 Count | 143 Count | 143 Count | 4.24 VDC | 0.14 VDC |
| 1792019552 | 704 Count | 130 Count | 130 Count | 4.28 VDC | 0.14 VDC |
| 1792017746 | 700 Count | 128 Count | 128 Count | 4.26 VDC | 0.14 VDC |
| 1792015940 | 696 Count | 126 Count | 126 Count | 4.33 VDC | 0.14 VDC |
| 1792014134 | 692 Count | 124 Count | 124 Count | 4.33 VDC | 0.14 VDC |
| 1792012328 | 688 Count | 122 Count | 122 Count | 4.33 VDC | 0.14 VDC |
| 1792010522 | 684 Count | 120 Count | 120 Count | 4.29 VDC | 0.14 VDC |
| 1792006981 | 676 Count | 116 Count | 116 Count | 4.31 VDC | 0.14 VDC |
| 1792005175 | 653 Count | 95 Count | 95 Count | 4.31 VDC | 0.14 VDC |
| 1792003369 | 649 Count | 93 Count | 93 Count | 4.31 VDC | 0.14 VDC |
| 1792001563 | 645 Count | 91 Count | 91 Count | 4.27 VDC | 0.14 VDC |
| 1791999757 | 641 Count | 89 Count | 89 Count | 4.34 VDC | 0.14 VDC |
| 1791997951 | 638 Count | 88 Count | 88 Count | 4.25 VDC | 0.14 VDC |
| 1791996146 | 634 Count | 86 Count | 86 Count | 4.29 VDC | 0.14 VDC |
| 1791994340 | 630 Count | 84 Count | 84 Count | 4.26 VDC | 0.14 VDC |
| 1791992534 | 626 Count | 82 Count | 82 Count | 4.28 VDC | 0.14 VDC |
| 1791990728 | 622 Count | 80 Count | 80 Count | 4.27 VDC | 0.14 VDC |
| 1791988922 | 615 Count | 75 Count | 75 Count | 4.31 VDC | 0.14 VDC |
| 1791987116 | 609 Count | 71 Count | 71 Count | 4.32 VDC | 0.14 VDC |
| 1791985381 | 599 Count | 63 Count | 63 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)