This is the latest recevied telemetry packets stored in our database for station/object OE6POD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1732302235 | 930.8 hPa | 21.2 C deg | 44.3 % | 1008.4 hPa | -0.8 C deg |
| 1732293230 | 929.1 hPa | 20.9 C deg | 39.6 % | 1006.6 hPa | -0.6 C deg |
| 1732289627 | 928.3 hPa | 19.9 C deg | 24.3 % | 1006.1 hPa | 0.3 C deg |
| 1732286028 | 926.6 hPa | 21.2 C deg | 44.6 % | 1003.8 hPa | 2.8 C deg |
| 1732284234 | 925.8 hPa | 21 C deg | 44.3 % | 1002.9 hPa | 3.8 C deg |
| 1732282428 | 925 hPa | 20.8 C deg | 44.2 % | 1002.2 hPa | 1.6 C deg |
| 1732278845 | 924 hPa | 20.6 C deg | 45.1 % | 1001.2 hPa | 2.6 C deg |
| 1732275227 | 923.6 hPa | 20.4 C deg | 43.3 % | 1000.8 hPa | 2.5 C deg |
| 1732271626 | 922.7 hPa | 20.3 C deg | 43.7 % | 999.8 hPa | 1.5 C deg |
| 1732268026 | 922 hPa | 20.1 C deg | 44.7 % | 999.1 hPa | 3.4 C deg |
| 1732264425 | 920.7 hPa | 19.7 C deg | 47.2 % | 997.9 hPa | 1.6 C deg |
| 1732262623 | 920.8 hPa | 19.1 C deg | 43.4 % | 998.1 hPa | 1.1 C deg |
| 1732260824 | 920.2 hPa | 18.1 C deg | 40.9 % | 997.7 hPa | 0.8 C deg |
| 1732259033 | 919.7 hPa | 13.1 C deg | 35.6 % | 998.6 hPa | 0.7 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)