APRS Track Direct

My position About ☰

reset

PE1PBA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PE1PBA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274316	0.11 Rx Erlang	0.02 Tx Erlang	51 count/10m	0 count/10m	10 count/10m
1782524309	0.16 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	4 count/10m
1782523109	0.09 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	4 count/10m
1782521909	0.17 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	6 count/10m
1782520709	0.17 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	3 count/10m
1782519509	0.09 Rx Erlang	0.01 Tx Erlang	40 count/10m	0 count/10m	4 count/10m
1782518309	0.17 Rx Erlang	0.01 Tx Erlang	56 count/10m	0 count/10m	6 count/10m
1782517109	0.16 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	3 count/10m
1782515909	0.11 Rx Erlang	0.01 Tx Erlang	39 count/10m	0 count/10m	4 count/10m
1782514709	0.1 Rx Erlang	0.01 Tx Erlang	42 count/10m	0 count/10m	6 count/10m
1782513509	0.16 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	3 count/10m
1782512309	0.17 Rx Erlang	0.01 Tx Erlang	50 count/10m	0 count/10m	4 count/10m
1782511109	0.09 Rx Erlang	0.01 Tx Erlang	40 count/10m	0 count/10m	6 count/10m
1782509909	0.16 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	3 count/10m
1782508709	0.16 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	4 count/10m
1782507509	0.09 Rx Erlang	0.01 Tx Erlang	40 count/10m	0 count/10m	6 count/10m
1782506309	0.16 Rx Erlang	0.01 Tx Erlang	50 count/10m	0 count/10m	4 count/10m
1782505109	0.1 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	4 count/10m
1782503909	0.16 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	6 count/10m
1782502709	0.17 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	4 count/10m
1782501511	0.09 Rx Erlang	0.01 Tx Erlang	36 count/10m	0 count/10m	4 count/10m
1782500309	0.09 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	6 count/10m
1782499109	0.15 Rx Erlang	0.01 Tx Erlang	48 count/10m	0 count/10m	3 count/10m
1782497909	0.09 Rx Erlang	0.01 Tx Erlang	35 count/10m	0 count/10m	4 count/10m
1782496709	0.15 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	6 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)