This is the latest recevied telemetry packets stored in our database for station/object OE3TEC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1749327872 | 991.2 hPa | 32.5 C deg | 27 % | 1014.6 hPa | 0 C deg |
| 1749322479 | 990.5 hPa | 33.9 C deg | 25.9 % | 1013.8 hPa | 0 C deg |
| 1749320677 | 989.8 hPa | 34.4 C deg | 25.4 % | 1013 hPa | 0 C deg |
| 1749318877 | 989.4 hPa | 35 C deg | 24.7 % | 1012.6 hPa | 0 C deg |
| 1749315276 | 989.7 hPa | 36.7 C deg | 22.9 % | 1012.7 hPa | 0 C deg |
| 1749313476 | 989.2 hPa | 37.3 C deg | 22.4 % | 1012.1 hPa | 0 C deg |
| 1749311671 | 989.2 hPa | 37.9 C deg | 22 % | 1012.2 hPa | 0 C deg |
| 1749309876 | 989.2 hPa | 38.2 C deg | 22 % | 1012.1 hPa | 0 C deg |
| 1749308070 | 989.2 hPa | 37.7 C deg | 22.5 % | 1012.2 hPa | 0 C deg |
| 1749306276 | 989.5 hPa | 37 C deg | 23.1 % | 1012.6 hPa | 0 C deg |
| 1749302876 | 989.9 hPa | 37.1 C deg | 24.2 % | 1012.9 hPa | 0 C deg |
| 1749293883 | 990 hPa | 35.9 C deg | 28.6 % | 1013.1 hPa | 0 C deg |
| 1749292084 | 989.9 hPa | 36.2 C deg | 28.3 % | 1013 hPa | 0 C deg |
| 1749290283 | 989.8 hPa | 35.8 C deg | 28.4 % | 1012.9 hPa | 0 C deg |
| 1749286669 | 990 hPa | 34.2 C deg | 28.6 % | 1013.3 hPa | 0 C deg |
| 1749284876 | 990.2 hPa | 33.7 C deg | 28.5 % | 1013.5 hPa | 0 C deg |
| 1749283071 | 990.4 hPa | 33.5 C deg | 28.5 % | 1013.7 hPa | 0 C deg |
| 1749279478 | 990.5 hPa | 31.5 C deg | 29.7 % | 1014 hPa | 0 C deg |
| 1749277669 | 990.8 hPa | 30 C deg | 30.8 % | 1014.4 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)