This is the latest recevied telemetry packets stored in our database for station/object YO8RBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | PM1.0* | PM2.5* | PM10* | RSSI* | SUN* |
---|---|---|---|---|---|
1719663604 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -48 dBm | 21 % |
1719661737 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -50 dBm | 20 % |
1719659913 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -51 dBm | 19 % |
1719658089 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -52 dBm | 20 % |
1719656264 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -45 dBm | 19 % |
1719654440 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -47 dBm | 20 % |
1719652616 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -49 dBm | 20 % |
1719650791 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -54 dBm | 22 % |
1719648967 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -53 dBm | 25 % |
1719647144 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -52 dBm | 30 % |
1719645319 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -47 dBm | 34 % |
1719643494 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -48 dBm | 56 % |
1719641670 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -47 dBm | 76 % |
1719639846 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -52 dBm | 65 % |
1719638022 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -50 dBm | 57 % |
1719636197 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -52 dBm | 69 % |
1719634373 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -48 dBm | 83 % |
1719632549 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -53 dBm | 14 % |
1719630724 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -56 dBm | 7 % |
1719628900 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -58 dBm | 2 % |
1719627076 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -56 dBm | 0 % |
1719625251 | 0 ug/m3 | 0 ug/m3 | 0 ug/m3 | -49 dBm | 0 % |
*Used Equation Coefficients:
PM1.0: 0, 1, 0
PM2.5: 0, 1, 0
PM10: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)