This is the latest recevied telemetry packets stored in our database for station/object OE1KFR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1719659388 | 988.4 hPa | 32.5 C deg | 45.1 % | 1015.7 hPa | 0 C deg |
1719657598 | 988.7 hPa | 32.7 C deg | 45.1 % | 1016 hPa | 0 C deg |
1719655807 | 989 hPa | 32.3 C deg | 45.6 % | 1016.4 hPa | 0 C deg |
1719652202 | 989.4 hPa | 31.9 C deg | 47 % | 1016.8 hPa | 0 C deg |
1719650397 | 989.8 hPa | 31.2 C deg | 49.6 % | 1017.3 hPa | 0 C deg |
1719648589 | 990.1 hPa | 34.4 C deg | 47.7 % | 1017.3 hPa | 0 C deg |
1719646795 | 990.3 hPa | 35.1 C deg | 48.3 % | 1017.4 hPa | 0 C deg |
1719644983 | 990.3 hPa | 35.7 C deg | 48.7 % | 1017.3 hPa | 0 C deg |
1719643182 | 990.4 hPa | 35.6 C deg | 48.4 % | 1017.5 hPa | 0 C deg |
1719641391 | 990.3 hPa | 33.3 C deg | 50.2 % | 1017.5 hPa | 0 C deg |
1719639583 | 990.3 hPa | 29.5 C deg | 50.6 % | 1017.9 hPa | 0 C deg |
1719637790 | 990.3 hPa | 23.6 C deg | 58.4 % | 1018.5 hPa | 0 C deg |
1719635992 | 990.2 hPa | 22.3 C deg | 59 % | 1018.5 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)