This is the latest recevied telemetry packets stored in our database for station/object TK5EP-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | Hum* | Poids* | Value5* |
|---|---|---|---|---|---|
| 1790653528 | 3.84 V | 15 C | 91 % | 15.75 kg | 86 |
| 1790651621 | 3.84 V | 15 C | 90.5 % | 15.75 kg | 90 |
| 1790650673 | 3.84 V | 15 C | 90.5 % | 15.75 kg | 88 |
| 1790649728 | 3.84 V | 15.5 C | 90.5 % | 15.75 kg | 94 |
| 1790648783 | 3.84 V | 15.5 C | 90 % | 15.75 kg | 92 |
| 1790646877 | 3.84 V | 15.5 C | 90 % | 15.75 kg | 104 |
| 1790645929 | 3.84 V | 15.5 C | 89.5 % | 15.75 kg | 94 |
| 1790644038 | 3.84 V | 15.5 C | 89 % | 15.75 kg | 95 |
| 1790643091 | 3.84 V | 16 C | 89 % | 15.75 kg | 98 |
| 1790642142 | 3.84 V | 16 C | 88.5 % | 15.75 kg | 96 |
| 1790639287 | 3.84 V | 16 C | 87.5 % | 15.75 kg | 98 |
| 1790638341 | 3.84 V | 16.5 C | 87 % | 15.75 kg | 100 |
| 1790637395 | 3.84 V | 16.5 C | 86 % | 15.75 kg | 102 |
| 1790636447 | 3.84 V | 17 C | 85.5 % | 15.75 kg | 101 |
| 1790635485 | 3.84 V | 17 C | 85.5 % | 15.75 kg | 98 |
| 1790633589 | 3.84 V | 17.5 C | 85 % | 15.75 kg | 101 |
| 1790632641 | 3.84 V | 17.5 C | 84.5 % | 15.75 kg | 105 |
| 1790631693 | 3.84 V | 17.5 C | 84.5 % | 15.75 kg | 102 |
| 1790629784 | 3.84 V | 18 C | 83.5 % | 15.75 kg | 100 |
| 1790628836 | 3.84 V | 18 C | 82.5 % | 15.75 kg | 109 |
| 1790625992 | 3.84 V | 18.5 C | 80.5 % | 15.75 kg | 111 |
| 1790625045 | 3.84 V | 19 C | 80 % | 15.75 kg | 113 |
| 1790624083 | 3.84 V | 19 C | 79.5 % | 15.75 kg | 118 |
| 1790623135 | 3.86 V | 19.5 C | 78.5 % | 15.75 kg | 118 |
| 1790622187 | 3.84 V | 20 C | 78 % | 15.75 kg | 117 |
*Used Equation Coefficients:
Vbat: 0, 0.008, 2.5
Temp: 0, 0.5, -40
Hum: 0, 0.5, 0
Poids: 0, 0.25, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)