APRS Track Direct

My position About ☰

reset

OK9DOB-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK9DOB-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	GasCounter*	ExtTemp*	ExtHum*	SysPres*	SysTemp*
1786722745	0.02 m3	33.7 deg.C	27 %	1012.4 Pa	36.7 deg.C
1786722139	0.02 m3	34.2 deg.C	27 %	1012.4 Pa	36.7 deg.C
1786721536	0.02 m3	34.1 deg.C	29 %	1012.5 Pa	36.6 deg.C
1786720933	0.02 m3	33.6 deg.C	27 %	1012.6 Pa	36.5 deg.C
1786720325	0.02 m3	33.8 deg.C	27 %	1012.6 Pa	36.6 deg.C
1786719722	0.02 m3	34.5 deg.C	27 %	1012.8 Pa	36.5 deg.C
1786719119	0.02 m3	34.5 deg.C	28 %	1012.9 Pa	36.5 deg.C
1786718516	0.02 m3	35.3 deg.C	26 %	1013 Pa	36.5 deg.C
1786717913	0.02 m3	34.8 deg.C	27 %	1013.2 Pa	36.4 deg.C
1786717309	0.02 m3	33.6 deg.C	27 %	1013.3 Pa	36.3 deg.C
1786716707	0.02 m3	33.4 deg.C	26 %	1013.4 Pa	36.3 deg.C
1786716104	0.02 m3	33.9 deg.C	28 %	1013.4 Pa	36.2 deg.C
1786715501	0.02 m3	33.8 deg.C	28 %	1013.7 Pa	36.2 deg.C
1786714898	0.02 m3	32.7 deg.C	28 %	1013.7 Pa	36.1 deg.C
1786714295	0.02 m3	34.1 deg.C	27 %	1013.8 Pa	36.1 deg.C
1786713693	0.02 m3	34.2 deg.C	29 %	1013.9 Pa	36 deg.C
1786713091	0.02 m3	32.6 deg.C	30 %	1014 Pa	36 deg.C
1786712487	0.02 m3	33.1 deg.C	29 %	1014.1 Pa	36 deg.C
1786711885	0.02 m3	32.5 deg.C	28 %	1014.2 Pa	35.9 deg.C
1786711277	0.02 m3	32.6 deg.C	30 %	1014.2 Pa	35.9 deg.C
1786710674	0.02 m3	32 deg.C	32 %	1014.3 Pa	35.9 deg.C
1786710072	0.02 m3	31.7 deg.C	33 %	1014.4 Pa	35.9 deg.C
1786709469	0.02 m3	31.8 deg.C	33 %	1014.5 Pa	35.8 deg.C
1786708866	0.02 m3	32 deg.C	34 %	1014.6 Pa	35.8 deg.C
1786708264	0.02 m3	31.6 deg.C	34 %	1014.8 Pa	35.8 deg.C

*Used Equation Coefficients:

GasCounter: 0, 0.01, 0

ExtTemp: 0, 0.1, 0

ExtHum: 0, 1, 0

SysPres: 0, 0.1, 0

SysTemp: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)