APRS Track Direct

My position About ☰

reset

KB5KSS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB5KSS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274641	14.33 Volt	300 Pkt	170 Pkt	83 Pcnt
1836274491	14.33 Volt	210 Pkt	170 Pkt	85 Pcnt
1836274341	14.33 Volt	280 Pkt	150 Pkt	83 Pcnt
1836274191	14.33 Volt	240 Pkt	170 Pkt	86 Pcnt
1836274041	14.33 Volt	310 Pkt	160 Pkt	83 Pcnt
1762291974	14.4 Volt	390 Pkt	170 Pkt	73 Pcnt
1762291674	14.4 Volt	340 Pkt	150 Pkt	72 Pcnt
1762291374	14.4 Volt	370 Pkt	150 Pkt	72 Pcnt
1762291074	14.4 Volt	330 Pkt	140 Pkt	73 Pcnt
1762290774	14.4 Volt	200 Pkt	130 Pkt	71 Pcnt
1762290474	14.4 Volt	170 Pkt	130 Pkt	70 Pcnt
1762290174	14.4 Volt	270 Pkt	140 Pkt	70 Pcnt
1762289874	14.4 Volt	240 Pkt	140 Pkt	71 Pcnt
1762289574	14.4 Volt	190 Pkt	130 Pkt	70 Pcnt
1762289274	14.4 Volt	200 Pkt	140 Pkt	70 Pcnt
1762288974	14.4 Volt	150 Pkt	140 Pkt	70 Pcnt
1762288674	14.4 Volt	180 Pkt	140 Pkt	71 Pcnt
1762288374	14.4 Volt	170 Pkt	150 Pkt	73 Pcnt
1762288074	14.4 Volt	280 Pkt	160 Pkt	72 Pcnt
1762287774	14.4 Volt	240 Pkt	140 Pkt	71 Pcnt
1762287474	14.4 Volt	250 Pkt	140 Pkt	73 Pcnt
1762287174	14.4 Volt	180 Pkt	150 Pkt	74 Pcnt
1762286879	14.4 Volt	210 Pkt	150 Pkt	75 Pcnt
1762286574	14.4 Volt	210 Pkt	150 Pkt	75 Pcnt
1762286274	14.4 Volt	260 Pkt	150 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)