This is the latest recevied telemetry packets stored in our database for station/object 9A1ARS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Rx1h* | Dg10m* | DgR* | Eff* |
|---|---|---|---|---|---|
| 1732219645 | 20 'C | 680 Pkt | 33 Pkt | 1.42 Pcnt | 63 Pcnt |
| 1732217845 | 20 'C | 640 Pkt | 34 Pkt | 1.42 Pcnt | 63 Pcnt |
| 1732214245 | 20.5 'C | 660 Pkt | 26 Pkt | 1.41 Pcnt | 63 Pcnt |
| 1732212446 | 20.5 'C | 600 Pkt | 25 Pkt | 1.41 Pcnt | 63 Pcnt |
| 1732210646 | 20.5 'C | 550 Pkt | 27 Pkt | 1.41 Pcnt | 63 Pcnt |
| 1732207046 | 20.5 'C | 620 Pkt | 21 Pkt | 1.4 Pcnt | 63 Pcnt |
| 1732205246 | 21 'C | 630 Pkt | 19 Pkt | 1.4 Pcnt | 63 Pcnt |
| 1732201646 | 21.5 'C | 720 Pkt | 53 Pkt | 1.39 Pcnt | 63 Pcnt |
| 1732196247 | 22.5 'C | 680 Pkt | 34 Pkt | 1.38 Pcnt | 63 Pcnt |
| 1732185446 | 23.5 'C | 740 Pkt | 28 Pkt | 1.36 Pcnt | 63 Pcnt |
| 1732183647 | 25.5 'C | 580 Pkt | 33 Pkt | 1.35 Pcnt | 63 Pcnt |
| 1732178247 | 19.5 'C | 410 Pkt | 21 Pkt | 1.34 Pcnt | 63 Pcnt |
| 1732176447 | 19.5 'C | 400 Pkt | 13 Pkt | 1.34 Pcnt | 63 Pcnt |
| 1732174647 | 19.5 'C | 400 Pkt | 24 Pkt | 1.34 Pcnt | 63 Pcnt |
| 1732172847 | 19 'C | 410 Pkt | 23 Pkt | 1.33 Pcnt | 63 Pcnt |
| 1732171047 | 19 'C | 420 Pkt | 22 Pkt | 1.33 Pcnt | 63 Pcnt |
| 1732167447 | 19 'C | 440 Pkt | 26 Pkt | 1.32 Pcnt | 63 Pcnt |
| 1732165647 | 19 'C | 420 Pkt | 23 Pkt | 1.32 Pcnt | 63 Pcnt |
| 1732163847 | 19 'C | 420 Pkt | 27 Pkt | 1.32 Pcnt | 63 Pcnt |
| 1732160247 | 19 'C | 400 Pkt | 23 Pkt | 1.31 Pcnt | 63 Pcnt |
| 1732156647 | 19 'C | 430 Pkt | 26 Pkt | 1.31 Pcnt | 63 Pcnt |
*Used Equation Coefficients:
Temp.: 0, 0.5, -64
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)