APRS Track Direct

My position About ☰

reset

DB0WOT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0WOT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1836274848	13.8 Volt	1050 Pkt	260 Pkt	59 Pcnt	24 C
1836274548	13.88 Volt	1060 Pkt	270 Pkt	58 Pcnt	24 C
1836274398	13.88 Volt	1040 Pkt	270 Pkt	58 Pcnt	24 C
1836274248	13.88 Volt	1090 Pkt	280 Pkt	59 Pcnt	24 C
1836273948	13.88 Volt	1050 Pkt	280 Pkt	59 Pcnt	24 C
1762278392	13.88 Volt	700 Pkt	180 Pkt	63 Pcnt	22 C
1762278092	13.88 Volt	680 Pkt	180 Pkt	63 Pcnt	22 C
1762277792	13.88 Volt	690 Pkt	190 Pkt	63 Pcnt	22 C
1762277492	13.88 Volt	680 Pkt	200 Pkt	63 Pcnt	22 C
1762277192	13.88 Volt	660 Pkt	200 Pkt	63 Pcnt	22 C
1762276892	13.88 Volt	670 Pkt	210 Pkt	64 Pcnt	22 C
1762276592	13.88 Volt	680 Pkt	200 Pkt	65 Pcnt	22 C
1762276292	13.88 Volt	690 Pkt	210 Pkt	64 Pcnt	22.5 C
1762275992	13.88 Volt	700 Pkt	210 Pkt	64 Pcnt	22.5 C
1762275692	13.88 Volt	670 Pkt	190 Pkt	63 Pcnt	22.5 C
1762275392	13.88 Volt	680 Pkt	200 Pkt	63 Pcnt	22.5 C
1762275092	13.88 Volt	660 Pkt	210 Pkt	63 Pcnt	22.5 C
1762274792	13.88 Volt	660 Pkt	210 Pkt	63 Pcnt	22.5 C
1762274492	13.88 Volt	650 Pkt	200 Pkt	63 Pcnt	22.5 C
1762274192	13.88 Volt	670 Pkt	210 Pkt	63 Pcnt	22.5 C
1762273892	13.88 Volt	670 Pkt	210 Pkt	63 Pcnt	23 C
1762273592	13.88 Volt	680 Pkt	220 Pkt	63 Pcnt	23 C
1762273292	13.88 Volt	690 Pkt	220 Pkt	62 Pcnt	23 C
1762272992	13.88 Volt	700 Pkt	230 Pkt	63 Pcnt	23 C
1762272693	13.8 Volt	700 Pkt	240 Pkt	64 Pcnt	23 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)