This is the latest recevied telemetry packets stored in our database for station/object N5QHO-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1762311060 | 13.95 Volt | 190 Pkt | 70 Pkt | 54 Pcnt | 63.5 F |
| 1762307396 | 13.95 Volt | 160 Pkt | 50 Pkt | 52 Pcnt | 63.5 F |
| 1762303731 | 13.95 Volt | 150 Pkt | 50 Pkt | 80 Pcnt | 63.5 F |
| 1762300068 | 13.95 Volt | 190 Pkt | 70 Pkt | 92 Pcnt | 63.5 F |
| 1762296404 | 13.95 Volt | 190 Pkt | 80 Pkt | 88 Pcnt | 63.5 F |
| 1762292741 | 13.95 Volt | 240 Pkt | 100 Pkt | 91 Pcnt | 63.5 F |
| 1762289077 | 13.95 Volt | 230 Pkt | 110 Pkt | 91 Pcnt | 63.5 F |
| 1762285414 | 13.95 Volt | 170 Pkt | 80 Pkt | 90 Pcnt | 63.5 F |
| 1762281750 | 13.95 Volt | 170 Pkt | 70 Pkt | 92 Pcnt | 63.5 F |
| 1762278087 | 13.95 Volt | 180 Pkt | 70 Pkt | 58 Pcnt | 63.5 F |
| 1762274423 | 13.95 Volt | 200 Pkt | 70 Pkt | 59 Pcnt | 63.5 F |
| 1762270760 | 13.95 Volt | 210 Pkt | 70 Pkt | 61 Pcnt | 63.5 F |
| 1762267096 | 13.95 Volt | 260 Pkt | 60 Pkt | 56 Pcnt | 63.5 F |
| 1762259771 | 13.95 Volt | 230 Pkt | 80 Pkt | 42 Pcnt | 63.5 F |
| 1762256106 | 13.95 Volt | 290 Pkt | 90 Pkt | 61 Pcnt | 63.5 F |
| 1762252443 | 13.95 Volt | 330 Pkt | 90 Pkt | 56 Pcnt | 63.5 F |
| 1762248779 | 13.95 Volt | 260 Pkt | 70 Pkt | 56 Pcnt | 63.5 F |
| 1762245117 | 13.95 Volt | 240 Pkt | 80 Pkt | 56 Pcnt | 63.5 F |
| 1762241456 | 13.95 Volt | 220 Pkt | 70 Pkt | 65 Pcnt | 63.5 F |
| 1762237788 | 13.95 Volt | 280 Pkt | 80 Pkt | 56 Pcnt | 63.5 F |
| 1762234125 | 13.95 Volt | 430 Pkt | 100 Pkt | 70 Pcnt | 63.5 F |
| 1762230462 | 13.95 Volt | 310 Pkt | 90 Pkt | 56 Pcnt | 63.5 F |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)