APRS Track Direct

My position About ☰

reset

YH1RIX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH1RIX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274621	0 Pkt	0 Pkt	-37 dBm	12.3 V
1762314954	0 Pkt	18 Pkt	-19 dBm	12.3 V
1762312206	2 Pkt	12 Pkt	-19 dBm	12.3 V
1762309467	0 Pkt	1 Pkt	-17 dBm	12.3 V
1762306739	0 Pkt	1 Pkt	-18 dBm	12.3 V
1762304011	0 Pkt	3 Pkt	-20 dBm	12.3 V
1762301279	0 Pkt	30 Pkt	-17 dBm	12.3 V
1762298519	0 Pkt	25 Pkt	-16 dBm	12.3 V
1762295766	0 Pkt	41 Pkt	-16 dBm	12.3 V
1762295766	0 Pkt	41 Pkt	-17 dBm	12.3 V
1762292999	38 Pkt	32 Pkt	-15 dBm	12.3 V
1762290238	115 Pkt	31 Pkt	-16 dBm	12.3 V
1762287469	116 Pkt	28 Pkt	-16 dBm	12.3 V
1762284707	110 Pkt	33 Pkt	-18 dBm	12.3 V
1762281941	112 Pkt	32 Pkt	-19 dBm	12.3 V
1762279176	115 Pkt	31 Pkt	-16 dBm	12.3 V
1762279176	115 Pkt	31 Pkt	-15 dBm	12.3 V
1762276409	77 Pkt	34 Pkt	-19 dBm	12.3 V
1762273643	0 Pkt	34 Pkt	-17 dBm	12.3 V
1762270883	12 Pkt	35 Pkt	-18 dBm	12.3 V
1762268117	109 Pkt	23 Pkt	-20 dBm	12.3 V
1762265360	9 Pkt	2 Pkt	-21 dBm	12.3 V
1762262629	0 Pkt	0 Pkt	-19 dBm	12.3 V
1762259836	0 Pkt	0 Pkt	-18 dBm	12.3 V
1762257109	0 Pkt	1 Pkt	-19 dBm	12.3 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)