This is the latest recevied telemetry packets stored in our database for station/object OE8CKK-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | UBatt* | ISolar* | P* | TCase* | Value5* |
|---|---|---|---|---|---|
| 1786742085 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786740885 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786738485 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786737285 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786734885 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786733685 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786731285 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786730085 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786727685 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786726485 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786724085 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786722885 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786720485 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786719285 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786716885 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786715685 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786713285 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786712085 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786709685 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786708485 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786706085 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786704885 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786702485 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786701285 | 0 V | 0 mA | 0 W | 0 C | 0 |
| 1786698885 | 0 V | 0 mA | 0 W | 0 C | 0 |
*Used Equation Coefficients:
UBatt: 0, 0.1, 0
ISolar: 0, 6, 0
P: 0, 0.1, 0
TCase: 0, 0.5, -30
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)