This is the latest recevied telemetry packets stored in our database for station/object W1WRA-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790671860 | 20 | 0.36 | 510 | 0 | 0 |
| 1790671260 | 20 | 0.51 | 511 | 0 | 0 |
| 1790670660 | 20 | 0.45 | 511 | 0 | 0 |
| 1790670060 | 20 | 0.43 | 512 | 0 | 0 |
| 1790669460 | 20 | 0.35 | 513 | 0 | 0 |
| 1790668860 | 20 | 0.38 | 513 | 0 | 0 |
| 1790668259 | 20 | 0.43 | 513 | 0 | 0 |
| 1790667659 | 20 | 0.3 | 514 | 0 | 0 |
| 1790667059 | 20 | 0.34 | 514 | 0 | 0 |
| 1790666459 | 20 | 0.35 | 515 | 0 | 0 |
| 1790665859 | 20 | 0.37 | 515 | 0 | 0 |
| 1790665259 | 20 | 0.35 | 516 | 0 | 0 |
| 1790664659 | 20 | 0.43 | 516 | 0 | 0 |
| 1790664059 | 20 | 0.36 | 517 | 0 | 0 |
| 1790663459 | 20 | 0.42 | 517 | 0 | 0 |
| 1790662859 | 20 | 0.42 | 517 | 0 | 0 |
| 1790662258 | 20 | 0.37 | 518 | 0 | 0 |
| 1790661658 | 20 | 0.35 | 518 | 0 | 0 |
| 1790661058 | 20 | 0.41 | 519 | 0 | 0 |
| 1790660458 | 20 | 0.32 | 519 | 0 | 0 |
| 1790659858 | 20 | 0.32 | 520 | 0 | 0 |
| 1790659258 | 20 | 0.38 | 520 | 0 | 0 |
| 1790658658 | 20 | 0.34 | 520 | 0 | 0 |
| 1790658058 | 20 | 0.38 | 521 | 0 | 0 |
| 1790657458 | 20 | 0.35 | 521 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)