This is the latest recevied telemetry packets stored in our database for station/object DF8DT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790643211 | 23.7 C | 39.78 % | 1022.75 hPa | 0 | 0 |
| 1790634185 | 25.6 C | 39.1 % | 1021.63 hPa | 0 | 0 |
| 1790625159 | 27.8 C | 37.78 % | 1022 hPa | 0 | 0 |
| 1790616133 | 31.8 C | 34.68 % | 1022 hPa | 0 | 0 |
| 1790607106 | 35.6 C | 31.91 % | 1020.25 hPa | 0 | 0 |
| 1790604101 | 33.9 C | 31.73 % | 1018.13 hPa | 0 | 0 |
| 1790603602 | 34.5 C | 31.22 % | 1020.75 hPa | 0 | 0 |
| 1790603163 | 35.3 C | 29.63 % | 1024.5 hPa | 0 | 0 |
| 1790602896 | 36.3 C | 27.88 % | 1020.38 hPa | 0 | 0 |
| 1790602715 | 37.9 C | 25.95 % | 1021.13 hPa | 0 | 0 |
| 1790601419 | 39.4 C | 32.23 % | 1021.63 hPa | 0 | 0 |
| 1790592393 | 39.8 C | 28.59 % | 1021.13 hPa | 0 | 0 |
| 1790583367 | 24 C | 39.11 % | 1020.63 hPa | 0 | 0 |
| 1790574340 | 23.5 C | 38.13 % | 1019.25 hPa | 0 | 0 |
| 1790572370 | 25.4 C | 37.18 % | 1020.88 hPa | 0 | 0 |
| 1790572060 | 25.7 C | 35.86 % | 1017.75 hPa | 0 | 0 |
| 1790571759 | 26.6 C | 34.66 % | 1020.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)