This is the latest recevied telemetry packets stored in our database for station/object TULLUGNG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786725609 | 1385 | 0 | 0 | 0 | 0 |
| 1786724407 | 1386 | 0 | 0 | 0 | 0 |
| 1786723807 | 1386 | 0 | 0 | 0 | 0 |
| 1786723210 | 1387 | 0 | 0 | 0 | 0 |
| 1786722607 | 1387 | 0 | 0 | 0 | 0 |
| 1786722007 | 1388 | 0 | 0 | 0 | 0 |
| 1786721409 | 1389 | 0 | 0 | 0 | 0 |
| 1786720809 | 1390 | 0 | 0 | 0 | 0 |
| 1786720209 | 1390 | 0 | 0 | 0 | 0 |
| 1786719608 | 1390 | 0 | 0 | 0 | 0 |
| 1786719006 | 1391 | 0 | 0 | 0 | 0 |
| 1786718408 | 1391 | 0 | 0 | 0 | 0 |
| 1786717808 | 1392 | 0 | 0 | 0 | 0 |
| 1786717207 | 1392 | 0 | 0 | 0 | 0 |
| 1786716607 | 1393 | 0 | 0 | 0 | 0 |
| 1786716007 | 1393 | 0 | 0 | 0 | 0 |
| 1786715406 | 1393 | 0 | 0 | 0 | 0 |
| 1786714807 | 1394 | 0 | 0 | 0 | 0 |
| 1786714209 | 1394 | 0 | 0 | 0 | 0 |
| 1786713605 | 1396 | 0 | 0 | 0 | 0 |
| 1786713009 | 1397 | 0 | 0 | 0 | 0 |
| 1786712408 | 1398 | 0 | 0 | 0 | 0 |
| 1786711807 | 1398 | 0 | 0 | 0 | 0 |
| 1786711210 | 1400 | 0 | 0 | 0 | 0 |
| 1786710607 | 1401 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)