This is the latest recevied telemetry packets stored in our database for station/object ER-DB0OHB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786785691 | 0 | 999 | 0 | 1 | 0 |
| 1786785091 | 0 | 999 | 0 | 1 | 0 |
| 1786784491 | 0 | 119 | 0 | 8 | 0 |
| 1786783891 | 0 | 104 | 0 | 7 | 0 |
| 1786783291 | 0 | 165 | 0 | 10 | 0 |
| 1786782691 | 0 | 833 | 0 | 3 | 0 |
| 1786782091 | 0 | 253 | 0 | 4 | 0 |
| 1786781491 | 0 | 308 | 0 | 7 | 0 |
| 1786780891 | 0 | 601 | 0 | 5 | 0 |
| 1786780291 | 0 | 165 | 0 | 9 | 0 |
| 1786779691 | 0 | 139 | 0 | 8 | 0 |
| 1786779091 | 0 | 86 | 0 | 6 | 0 |
| 1786778491 | 0 | 166 | 0 | 12 | 0 |
| 1786777891 | 0 | 191 | 0 | 11 | 0 |
| 1786777291 | 0 | 995 | 0 | 1 | 0 |
| 1786776691 | 0 | 999 | 0 | 1 | 0 |
| 1786776091 | 0 | 999 | 0 | 1 | 0 |
| 1786775491 | 6 | 995 | 1 | 2 | 0 |
| 1786774891 | 27 | 929 | 2 | 5 | 0 |
| 1786774291 | 0 | 406 | 0 | 8 | 0 |
| 1786773691 | 0 | 79 | 0 | 5 | 0 |
| 1786773091 | 0 | 50 | 0 | 3 | 0 |
| 1786772491 | 0 | 35 | 0 | 2 | 0 |
| 1786771891 | 0 | 16 | 0 | 1 | 0 |
| 1786771291 | 0 | 16 | 0 | 1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)