This is the latest recevied telemetry packets stored in our database for station/object OE3GJC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1745065708 | 986.3 hPa | 41.3 C deg | 40 % | 320 - | 0 C deg |
| 1745063880 | 986.4 hPa | 43 C deg | 38.1 % | 399 - | 0 C deg |
| 1745062080 | 986.6 hPa | 37.4 C deg | 40.2 % | 530 - | 0 C deg |
| 1745060279 | 986.8 hPa | 35.9 C deg | 41.3 % | 578 - | 0 C deg |
| 1745058478 | 987.1 hPa | 34.3 C deg | 40.9 % | 531 - | 0 C deg |
| 1745056677 | 987.2 hPa | 35.5 C deg | 39.9 % | 586 - | 0 C deg |
| 1745054877 | 987.4 hPa | 36 C deg | 40.3 % | 592 - | 0 C deg |
| 1745053076 | 987.4 hPa | 35.7 C deg | 39.4 % | 611 - | 0 C deg |
| 1745051276 | 987.5 hPa | 34.7 C deg | 38.3 % | 617 - | 0 C deg |
| 1745049474 | 987.8 hPa | 38 C deg | 36.8 % | 575 - | 0 C deg |
| 1745048961 | 987.9 hPa | 35.9 C deg | 37.1 % | 647 - | 0 C deg |
| 1745045845 | 988.2 hPa | 37.1 C deg | 34.7 % | 712 - | 0 C deg |
| 1745044044 | 988.4 hPa | 30.6 C deg | 37.1 % | 922 - | 0 C deg |
| 1745042243 | 988.5 hPa | 30.5 C deg | 36.2 % | 1065 - | 0 C deg |
| 1745040442 | 988.5 hPa | 23.9 C deg | 38.4 % | 1305 - | 0 C deg |
| 1745038642 | 988.6 hPa | 22.4 C deg | 38.7 % | 1360 - | 0 C deg |
| 1745036840 | 988.6 hPa | 22.1 C deg | 38.4 % | 1357 - | 0 C deg |
| 1745035039 | 988.7 hPa | 22 C deg | 38.3 % | 1348 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)