APRS Track Direct

My position About ☰

reset

KX4O-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KX4O-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg10m*	Eff1h*	DgR1h*
1758199038	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758198738	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758198438	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758198138	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758197838	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758197538	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758197238	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758196938	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758196638	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758196338	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758196038	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758195738	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758195438	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758195138	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758194838	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758194538	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758194238	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758193938	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758193638	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758193338	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758193038	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758192738	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758192438	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758192138	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt
1758191838	0 Volt	0 Pkt	0 Pkt	100 Pcnt	0 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

DgR1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)